P0101 on Buick
Mass or Volume Air Flow Sensor Circuit Range/Performance
P0101 on Buick vehicles indicates mass or volume air flow sensor circuit range/performance. Au7o has documented this code across 1 Buick model — most commonly on Enclave. This powertrain code means the mass air flow (MAF) sensor's reading is out of the expected range or not changing as it should compared to other engine data. The MAF sensor measures how much air enters the engine so the computer can calculate the correct fuel amount. When the reported airflow doesn't match expectations, the air-fuel mixture can be off, causing rough running, hesitation, stalling, or poor fuel economy. It is usually not an emergency but should be fixed for proper performance and emissions.
Common Causes of P0101
- •Dirty or contaminated MAF sensor element
- •Vacuum/intake air leak (unmetered air after the sensor)
- •Loose, cracked, or torn intake air ducting
- •Dirty or clogged air filter
- •Faulty MAF sensor
- •Wiring or connector problems at the MAF sensor
P0101 on Buick by Model
Buick Enclave(1 issue)
- Cold-Weather PCV Deposits Can Cause Reduced Power (PI0746)2008-2011
GM PI0746 covers 2008-2011 Buick Enclave vehicles with the 3.6L LY7 or LLT engine. After a cold start or low-ambient-temperature driving, condensation can freeze at the throttle-body base while engine vapors, fuel dilution and oil mist collect in the air-inlet duct. The condition can illuminate the MIL and cause poor performance or reduced acceleration.
Looking for P0101 on a different make?
View P0101 across all makes →Frequently Asked Questions
What does P0101 mean on Buick?▼
P0101 stands for "Mass or Volume Air Flow Sensor Circuit Range/Performance." This powertrain code means the mass air flow (MAF) sensor's reading is out of the expected range or not changing as it should compared to other engine data. The MAF sensor measures how much air enters the engine so the computer can calculate the correct fuel amount. When the reported airflow doesn't match expectations, the air-fuel mixture can be off, causing rough running, hesitation, stalling, or poor fuel economy. It is usually not an emergency but should be fixed for proper performance and emissions. On Buick specifically, this code is documented across 1 model.
What causes P0101 on Buick vehicles?▼
Common causes on Buick: Dirty or contaminated MAF sensor element, Vacuum/intake air leak (unmetered air after the sensor), Loose, cracked, or torn intake air ducting, Dirty or clogged air filter, Faulty MAF sensor. Specific causes vary by model and year — see the per-model sections below.
How much does it cost to fix P0101 on a Buick?▼
Repair costs vary widely depending on the root cause and specific Buick model.
Which Buick models have P0101 documented?▼
Au7o has documented P0101 on 1 Buick model: Enclave.