P0455 on Mazda
Evaporative Emission Control System Leak Detected (Gross Leak)
P0455 on Mazda vehicles indicates evaporative emission control system leak detected (gross leak). Au7o has documented this code across 2 Mazda models — most commonly on Mazda3, Mazda5. This code means your car's evaporative emission (EVAP) system has detected a large (gross) leak, so fuel vapors that should be sealed inside the fuel and vapor system are escaping into the atmosphere. The EVAP system captures gasoline vapors from the tank and routes them to the engine to be burned instead of polluting the air, and the computer periodically pressure- or vacuum-tests this sealed system. A gross leak almost always points to something obvious and easy, like a loose, missing, or bad gas cap, rather than a deep mechanical failure. It rarely affects how the car drives, but it should be fixed to pass emissions and stop wasting fuel vapor. Typical repair costs on Mazda range from $800 to $1,800, depending on the specific model and root cause.
Common Causes of P0455
- •Loose, missing, or improperly tightened gas cap
- •Worn, cracked, or failed gas cap seal
- •Cracked or disconnected EVAP/vapor hose
- •Damaged or missing fuel filler neck seal
- •Faulty EVAP purge valve stuck open
- •Failed EVAP vent valve
- •Cracked or damaged charcoal canister
P0455 on Mazda by Model
Mazda Mazda3(1 issue)
- 2004-2010 Mazda3 EVAP Leak or P0441 - Test Before Replacing the Purge Valve2004-2010
Mazda bulletin 01-002/18 provides a diagnosis path for a 2004-2010 Mazda3 with P0441, P0442, P0455, or P0456. The same code family can come from a loose, damaged, rusty, or leaking filler cap or neck; another EVAP-system leak; or a purge solenoid that does not seal or flow correctly. Mazda specifically notes that P0441 can be stored because of a fuel-filler-cap leak. The bulletin is not evidence that 2014-2018 SkyActiv purge valves commonly fail, and it does not identify PE01-18-741 as a universal fix.
Mazda Mazda5(1 issue)
- A/C Evaporator Core Leak2006-2015
The A/C evaporator core in the Mazda5 develops pinhole leaks from internal corrosion, causing refrigerant loss. The evaporator is located behind the dashboard, making replacement extremely labor-intensive. Corrosion is accelerated by moisture trapped in the cabin air filter area and infrequent cabin filter replacement.
Looking for P0455 on a different make?
View P0455 across all makes →Frequently Asked Questions
What does P0455 mean on Mazda?▼
P0455 stands for "Evaporative Emission Control System Leak Detected (Gross Leak)." This code means your car's evaporative emission (EVAP) system has detected a large (gross) leak, so fuel vapors that should be sealed inside the fuel and vapor system are escaping into the atmosphere. The EVAP system captures gasoline vapors from the tank and routes them to the engine to be burned instead of polluting the air, and the computer periodically pressure- or vacuum-tests this sealed system. A gross leak almost always points to something obvious and easy, like a loose, missing, or bad gas cap, rather than a deep mechanical failure. It rarely affects how the car drives, but it should be fixed to pass emissions and stop wasting fuel vapor. On Mazda specifically, this code is documented across 2 models.
What causes P0455 on Mazda vehicles?▼
Common causes on Mazda: Loose, missing, or improperly tightened gas cap, Worn, cracked, or failed gas cap seal, Cracked or disconnected EVAP/vapor hose, Damaged or missing fuel filler neck seal, Faulty EVAP purge valve stuck open. Specific causes vary by model and year — see the per-model sections below.
How much does it cost to fix P0455 on a Mazda?▼
Repair costs on Mazda range from $800 to $1,800, depending on the specific model and root cause.
Which Mazda models have P0455 documented?▼
Au7o has documented P0455 on 2 Mazda models: Mazda3, Mazda5.