P2764 on Dodge
Torque Converter Clutch Pressure Control Solenoid Control Circuit Low
P2764 on Dodge vehicles indicates torque converter clutch pressure control solenoid control circuit low. Au7o has documented this code across 1 Dodge model — most commonly on Avenger. This code means the powertrain or transmission control module detected a low-voltage condition in the control circuit for the torque converter clutch (TCC) pressure control solenoid. This solenoid regulates the hydraulic pressure that locks and unlocks the torque converter clutch for fuel efficiency. A low circuit fault can prevent proper clutch engagement, causing harsh or erratic shifting, slipping, stalling, or transmission overheating. The cause is most often electrical but can involve the solenoid or fluid condition.
Common Causes of P2764
- •Faulty TCC pressure control solenoid
- •Damaged or corroded wiring/connectors in the circuit
- •Short to ground in the control circuit
- •Low or contaminated transmission fluid
- •Valve body issues
- •Poor ground or power supply
- •Faulty PCM/TCM
P2764 on Dodge by Model
Dodge Avenger(1 issue)
- 62TE Jerking or Slipping With P0740/P2764: Check TCC Solenoid First2011-2014
FCA GPOP communication 9004206 applies to 2011-2014 JS-platform vehicles. For a 62TE-equipped Dodge Avenger that jerks or slips with P0740 or P2764, the communication directs technicians to check torque-converter-clutch solenoid operation. If the solenoid operates correctly, FCA identifies the codes as indicating torque-converter failure.
Looking for P2764 on a different make?
View P2764 across all makes →Frequently Asked Questions
What does P2764 mean on Dodge?▼
P2764 stands for "Torque Converter Clutch Pressure Control Solenoid Control Circuit Low." This code means the powertrain or transmission control module detected a low-voltage condition in the control circuit for the torque converter clutch (TCC) pressure control solenoid. This solenoid regulates the hydraulic pressure that locks and unlocks the torque converter clutch for fuel efficiency. A low circuit fault can prevent proper clutch engagement, causing harsh or erratic shifting, slipping, stalling, or transmission overheating. The cause is most often electrical but can involve the solenoid or fluid condition. On Dodge specifically, this code is documented across 1 model.
What causes P2764 on Dodge vehicles?▼
Common causes on Dodge: Faulty TCC pressure control solenoid, Damaged or corroded wiring/connectors in the circuit, Short to ground in the control circuit, Low or contaminated transmission fluid, Valve body issues. Specific causes vary by model and year — see the per-model sections below.
How much does it cost to fix P2764 on a Dodge?▼
Repair costs vary widely depending on the root cause and specific Dodge model.
Which Dodge models have P2764 documented?▼
Au7o has documented P2764 on 1 Dodge model: Avenger.