C1368 on Toyota
Manufacturer-Specific Chassis/Brake Code (commonly Linear Solenoid Valve Offset, Toyota/Lexus)
C1368 on Toyota vehicles indicates manufacturer-specific chassis/brake code (commonly linear solenoid valve offset, toyota/lexus). Au7o has documented this code across 1 Toyota model — most commonly on Camry. C1368 is a manufacturer-specific chassis code most commonly seen on Toyota/Lexus, where it indicates a linear solenoid valve offset malfunction within the brake/stability control hydraulic system; on those vehicles the module detected an out-of-range offset or learned value for a brake actuator solenoid. The exact meaning can differ on other makes. Setting this code typically disables or limits ABS, brake assist, and stability control and lights the related warnings. Confirm the definition and required relearn/initialization procedure for your specific make and model with factory service information. Typical repair costs on Toyota range from $1,200 to $3,000, depending on the specific model and root cause.
Common Causes of C1368
- •Faulty brake actuator / linear solenoid valve assembly
- •Offset/zero-point not initialized after service
- •Wiring or connector fault at the brake actuator
- •Low or unstable system voltage / poor ground
- •ABS/stability (skid control) module fault
- •Contamination or internal hydraulic fault
C1368 on Toyota by Model
Toyota Camry(1 issue)
- Brake Actuator / ABS Module Internal Failure Causing Warning Lights and Loss of Assist2007-2017
A well-documented issue on many Camry and Camry Hybrid models is failure of the brake actuator/ABS pump assembly, often accompanied by ABS, brake, traction, and master warning lights. Owners report the pump running frequently or continuously, a buzzing noise from the engine bay, hard pedal feel, and reduced brake assist. On hybrids, this can become especially expensive because the actuator and booster assemblies are complex and labor-intensive to replace.
Looking for C1368 on a different make?
View C1368 across all makes →Frequently Asked Questions
What does C1368 mean on Toyota?▼
C1368 stands for "Manufacturer-Specific Chassis/Brake Code (commonly Linear Solenoid Valve Offset, Toyota/Lexus)." C1368 is a manufacturer-specific chassis code most commonly seen on Toyota/Lexus, where it indicates a linear solenoid valve offset malfunction within the brake/stability control hydraulic system; on those vehicles the module detected an out-of-range offset or learned value for a brake actuator solenoid. The exact meaning can differ on other makes. Setting this code typically disables or limits ABS, brake assist, and stability control and lights the related warnings. Confirm the definition and required relearn/initialization procedure for your specific make and model with factory service information. On Toyota specifically, this code is documented across 1 model.
What causes C1368 on Toyota vehicles?▼
Common causes on Toyota: Faulty brake actuator / linear solenoid valve assembly, Offset/zero-point not initialized after service, Wiring or connector fault at the brake actuator, Low or unstable system voltage / poor ground, ABS/stability (skid control) module fault. Specific causes vary by model and year — see the per-model sections below.
How much does it cost to fix C1368 on a Toyota?▼
Repair costs on Toyota range from $1,200 to $3,000, depending on the specific model and root cause.
Which Toyota models have C1368 documented?▼
Au7o has documented C1368 on 1 Toyota model: Camry.