P0D26 on Cadillac: How to Diagnose & Fix
Battery Charger Hybrid/EV System Precharge Time Too Long
1 Cadillac model · 1 documented issue · 1 critical
P0D26 on Cadillac by model: symptoms, diagnosis and fix
GM PIC6015A and PIC6076 cover bounded ELR no-charge and Service High Voltage Charging System paths. A cord, charging station, pilot-signal fault, cracked or water-affected receptacle, or an applicable HPCM2 calibration can produce the concern; the bulletins do not establish universal onboard-charger failure.
Common Symptoms
- Vehicle will not charge
- Service High Voltage Charging System message
How to Fix
Have a qualified technician record DTCs and freeze-frame data, rule out the cord and charging infrastructure, inspect the charge receptacle for cracks or water intrusion, and apply the current GM diagnostic or HPCM2 programming path when its criteria are met. Do not order charging hardware from this card.
Sources for this issue (2)
P0D26 code reference
General diagnostic-code context. The code alone does not confirm a cause for your vehicle; use the applicable issue card and its sources.
Frequently asked questions
What does P0D26 mean on a Cadillac?
P0D26 stands for "Battery Charger Hybrid/EV System Precharge Time Too Long." Applies to hybrids and plug-in/electric vehicles; frequently reported on GM plug-ins such as the Chevrolet Volt. Before the onboard charger connects to the high-voltage battery pack, it must raise its output voltage to match pack voltage - a step called precharge. The hybrid/EV powertrain control module monitors how long precharge takes and sets this code when it exceeds the calibrated time, so charging aborts. The practical symptom is that the vehicle will not charge, often with a charging fault message and no ability to run in electric mode once the pack is depleted. High-voltage systems are dangerous; this diagnosis belongs with a qualified hybrid/EV technician. On Cadillac it is documented across 1 model: ELR.
What are the most common causes of P0D26?
The most common causes of P0D26 are: Failed onboard battery charger module, Faulty precharge resistor or precharge relay/contactor in the high-voltage battery disconnect unit, High-voltage battery pack contactor fault, Damaged or corroded high-voltage wiring or connectors between charger and pack, Charge port or EVSE supply issue causing unstable input voltage, Battery energy control module or software calibration fault. The specific cause varies by vehicle.
How much does it cost to fix P0D26 on a Cadillac?
Repair costs vary widely with the root cause and Cadillac model; each issue on this page carries its own estimate where one is published.
Looking for P0D26 on a different make?
View P0D26 across all makes →Content compiled with AI assistance using NHTSA complaints, TSBs, and owner reports. May contain errors. Always verify with your vehicle's service manual.