01276 on Volkswagen
ABS Hydraulic Pump (V64)
01276 on Volkswagen vehicles indicates abs hydraulic pump (v64). Au7o has documented this code across 1 Volkswagen model — most commonly on New Beetle. This is a VAG (VW/Audi/SEAT/Skoda) manufacturer-specific fault code, read via VCDS/Ross-Tech, indicating a fault with the ABS hydraulic pump motor (V64) inside the ABS/ESP control unit. It is typically logged as a signal-outside-tolerance, electrical, or implausible-signal fault, and usually triggers the ABS, ESP/traction control, and brake warning lights. The ABS and stability systems are disabled while this fault is active, though normal hydraulic braking still works. Typical repair costs on Volkswagen range from $200 to $800, depending on the specific model and root cause.
Common Causes of 01276
- •Worn or failed ABS hydraulic pump motor (V64) inside the ABS/ESP module
- •Blown screw-type fuses on top of the battery cutting power to the pump
- •Corroded or poor ground/earth connections
- •Damaged wiring, connectors, or plugs between the pump and brake control module
- •Internal fault in the Brake Electronics Control Module (J104) / ABS control unit
- •Low battery voltage or charging-system issues causing implausible pump signal
01276 on Volkswagen by Model
Volkswagen New Beetle(1 issue)
- ABS Control Module Failure2000-2005
The ABS control module fails, illuminating ABS and traction control warning lights. The module is prone to internal solder joint failures from vibration. Can cause erratic ABS activation or complete ABS loss.
Looking for 01276 on a different make?
View 01276 across all makes →Frequently Asked Questions
What does 01276 mean on Volkswagen?▼
01276 stands for "ABS Hydraulic Pump (V64)." This is a VAG (VW/Audi/SEAT/Skoda) manufacturer-specific fault code, read via VCDS/Ross-Tech, indicating a fault with the ABS hydraulic pump motor (V64) inside the ABS/ESP control unit. It is typically logged as a signal-outside-tolerance, electrical, or implausible-signal fault, and usually triggers the ABS, ESP/traction control, and brake warning lights. The ABS and stability systems are disabled while this fault is active, though normal hydraulic braking still works. On Volkswagen specifically, this code is documented across 1 model.
What causes 01276 on Volkswagen vehicles?▼
Common causes on Volkswagen: Worn or failed ABS hydraulic pump motor (V64) inside the ABS/ESP module, Blown screw-type fuses on top of the battery cutting power to the pump, Corroded or poor ground/earth connections, Damaged wiring, connectors, or plugs between the pump and brake control module, Internal fault in the Brake Electronics Control Module (J104) / ABS control unit. Specific causes vary by model and year — see the per-model sections below.
How much does it cost to fix 01276 on a Volkswagen?▼
Repair costs on Volkswagen range from $200 to $800, depending on the specific model and root cause.
Which Volkswagen models have 01276 documented?▼
Au7o has documented 01276 on 1 Volkswagen model: New Beetle.