01276CriticalBrakes

01276 on 2000-2005 Volkswagen New Beetle — ABS Hydraulic Pump (V64)

1 vehicles · 1 makes · $200-$800 repair

Share:@au7o.io

How to diagnose and fix 01276: most-reported vehicles

Ranked by owner reports. Each card gives the symptoms, how to confirm the cause, the fix, parts and sources for that vehicle.

Volkswagen New Beetle · 2000–2005

The ABS control module fails, illuminating ABS and traction control warning lights. The module is prone to internal solder joint failures from vibration. Can cause erratic ABS activation or complete ABS loss.

Common Symptoms

  • ABS light on
  • Traction control light on
  • ABS activates at low speed
  • Brake pedal pulsation without ABS need

How to Fix

The ABS module can often be repaired by resoldering the internal connections. Replacement modules are also available rebuilt. Requires bleeding with a scan tool after replacement.

Typical repair cost:$200 - $800
Sources for this issue (1)

Research This Issue

Community Reported
Medium ConfidenceUpdated Oct 27, 2026

Find 01276 by make

Browse every documented model and issue for your make.

01276 code reference

General diagnostic-code context. The code alone does not confirm a cause for your vehicle; use the applicable issue card and its sources.

Frequently asked questions

What does 01276 mean?

01276 stands for "ABS Hydraulic Pump (V64)." This is a VAG (VW/Audi/SEAT/Skoda) manufacturer-specific fault code, read via VCDS/Ross-Tech, indicating a fault with the ABS hydraulic pump motor (V64) inside the ABS/ESP control unit. It is typically logged as a signal-outside-tolerance, electrical, or implausible-signal fault, and usually triggers the ABS, ESP/traction control, and brake warning lights. The ABS and stability systems are disabled while this fault is active, though normal hydraulic braking still works.

What are the most common causes of 01276?

The most common causes of 01276 are: Worn or failed ABS hydraulic pump motor (V64) inside the ABS/ESP module, Blown screw-type fuses on top of the battery cutting power to the pump, Corroded or poor ground/earth connections, Damaged wiring, connectors, or plugs between the pump and brake control module, Internal fault in the Brake Electronics Control Module (J104) / ABS control unit, Low battery voltage or charging-system issues causing implausible pump signal. The specific cause varies by vehicle.

How much does it cost to fix 01276?

Repair costs for 01276 range from $200 to $800, depending on the vehicle and root cause.

Which vehicles are affected by 01276?

Au7o has documented 01276 across 1 vehicle models from 1 manufacturers: Volkswagen.

🔧
A mechanic who knows YOUR exact car
Answers tuned to your year, make, model & trim — not generic advice. Save your garage so it always has the right context.
Get notified about 01276 fixes
We add new causes, fixes and affected vehicles for 01276 regularly — drop your email and we'll keep you posted. You can also diagnose your own car free.

Join 600+ people using Au7o to better understand their vehicles.

Content compiled with AI assistance using NHTSA complaints, TSBs, and owner reports. May contain errors. Always verify with your vehicle's service manual.