C0041 on Jeep
Right Front Wheel Speed Sensor Circuit Range/Performance
C0041 on Jeep vehicles indicates right front wheel speed sensor circuit range/performance. Au7o has documented this code across 1 Jeep model — most commonly on Grand Wagoneer. This code indicates the ABS/electronic brake control module is not receiving a clean, reliable signal from the right front wheel speed sensor. The signal is present but out of the expected range or behaving erratically, so the module flags it as unreliable. ABS, traction control, and stability control may be turned off as a precaution, often lighting the ABS, traction, and brake warning lamps. Normal braking is retained, but the anti-lock and stability functions may not engage when needed. Typical repair costs on Jeep range from $250 to $1,200, depending on the specific model and root cause.
Common Causes of C0041
- •Failed or weak right front wheel speed sensor
- •Damaged sensor wiring (common GM break point at the wheel)
- •Corroded or loose sensor connector
- •Rust or debris at the sensor/tone ring gap
- •Damaged or cracked tone (reluctor) ring
- •Excessive wheel bearing play
- •Poor ground or connection at the EBCM
C0041 on Jeep by Model
Jeep Grand Wagoneer(1 issue)
- Electronic Stability Control/ABS warning with wheel speed sensor or tone ring faults2022-2024
NHTSA complaints and owner reports describe intermittent ABS/ESC warnings on Grand Wagoneer tied to wheel speed sensor signal loss or erratic readings, sometimes after wet weather or road debris impacts. When the system detects implausible wheel speed data, it can disable ABS/ESC functions and illuminate multiple warnings.
Looking for C0041 on a different make?
View C0041 across all makes →Frequently Asked Questions
What does C0041 mean on Jeep?▼
C0041 stands for "Right Front Wheel Speed Sensor Circuit Range/Performance." This code indicates the ABS/electronic brake control module is not receiving a clean, reliable signal from the right front wheel speed sensor. The signal is present but out of the expected range or behaving erratically, so the module flags it as unreliable. ABS, traction control, and stability control may be turned off as a precaution, often lighting the ABS, traction, and brake warning lamps. Normal braking is retained, but the anti-lock and stability functions may not engage when needed. On Jeep specifically, this code is documented across 1 model.
What causes C0041 on Jeep vehicles?▼
Common causes on Jeep: Failed or weak right front wheel speed sensor, Damaged sensor wiring (common GM break point at the wheel), Corroded or loose sensor connector, Rust or debris at the sensor/tone ring gap, Damaged or cracked tone (reluctor) ring. Specific causes vary by model and year — see the per-model sections below.
How much does it cost to fix C0041 on a Jeep?▼
Repair costs on Jeep range from $250 to $1,200, depending on the specific model and root cause.
Which Jeep models have C0041 documented?▼
Au7o has documented C0041 on 1 Jeep model: Grand Wagoneer.