C0760 on GMC
ABS System Disabled
C0760 on GMC vehicles indicates abs system disabled. Au7o has documented this code across 1 GMC model — most commonly on Hummer EV SUV. This chassis code indicates that the anti-lock braking system (ABS) has been disabled or is being commanded off due to a detected fault. When the ABS control module finds a problem it cannot tolerate, it shuts down ABS function and usually illuminates the ABS warning light, often disabling related features like traction or stability control as well. Importantly, normal hydraulic braking still works, but the anti-lock and electronic assistance features are turned off. This code is typically a result of another underlying fault, so the system should be scanned for accompanying codes that point to the root cause.
Common Causes of C0760
- •Faulty wheel speed sensor or damaged sensor wiring
- •Low system voltage or charging problem
- •Faulty ABS control module
- •Blown fuse or power supply fault to the ABS system
- •Poor ground or connector corrosion in the ABS circuit
- •Another active ABS fault triggering system shutdown
- •Communication (network) fault with the ABS module
C0760 on GMC by Model
GMC Hummer EV SUV(1 issue)
- Adaptive Air Suspension Calibration Errors and Extract Mode Failures2024-2026
The Hummer EV SUV's adaptive air suspension system, which offers up to 16 inches of ground clearance in Extract Mode, can develop calibration errors that prevent the system from reaching full height. The height sensors, air compressor, and air springs must all function in concert. Software bugs can cause the system to display incorrect ride height or refuse to enter Extract Mode. The compressor can also overheat from repeated height adjustment cycles, entering a cooldown period that locks out suspension adjustments.
Looking for C0760 on a different make?
View C0760 across all makes →Frequently Asked Questions
What does C0760 mean on GMC?▼
C0760 stands for "ABS System Disabled." This chassis code indicates that the anti-lock braking system (ABS) has been disabled or is being commanded off due to a detected fault. When the ABS control module finds a problem it cannot tolerate, it shuts down ABS function and usually illuminates the ABS warning light, often disabling related features like traction or stability control as well. Importantly, normal hydraulic braking still works, but the anti-lock and electronic assistance features are turned off. This code is typically a result of another underlying fault, so the system should be scanned for accompanying codes that point to the root cause. On GMC specifically, this code is documented across 1 model.
What causes C0760 on GMC vehicles?▼
Common causes on GMC: Faulty wheel speed sensor or damaged sensor wiring, Low system voltage or charging problem, Faulty ABS control module, Blown fuse or power supply fault to the ABS system, Poor ground or connector corrosion in the ABS circuit. Specific causes vary by model and year — see the per-model sections below.
How much does it cost to fix C0760 on a GMC?▼
Repair costs vary widely depending on the root cause and specific GMC model.
Which GMC models have C0760 documented?▼
Au7o has documented C0760 on 1 GMC model: Hummer EV SUV.