C1259 on 2019-2021 Hyundai Veloster — Manufacturer-Specific Chassis Code (Wheel-Speed Comparison or Steering Angle Sensor)
1 vehicles · 1 makes · $250-$2,200 repair
How to diagnose and fix C1259: most-reported vehicles
Ranked by owner reports. Each card gives the symptoms, how to confirm the cause, the fix, parts and sources for that vehicle.
Hyundai Veloster · 2019–2021
Multiple owners reported sudden loss of steering assist or abnormally heavy steering effort, sometimes accompanied by warning lights and fault messages. On modern Hyundai platforms this is commonly tied to the Motor Driven Power Steering (MDPS) system, steering angle/torque sensing, or column-related electrical faults. Even when the vehicle remains steerable, the abrupt increase in effort creates a meaningful safety concern at low speeds and during evasive maneuvers.
Common Symptoms
- sudden heavy steering
- loss of power steering assist
- EPS or steering warning light
- steering effort changes while driving
- warning chime or message on cluster
How to Fix
Perform a full scan of EPS/MDPS modules, inspect battery voltage and charging stability, and check steering column connectors and torque/angle sensor data. Depending on findings, repairs may involve software updates, steering column or MDPS component replacement, and steering angle calibration. Intermittent failures should be documented with freeze-frame data because some vehicles behave normally once restarted.
Sources for this issue (2)
Find C1259 by make
Browse every documented model and issue for your make.
C1259 code reference
General diagnostic-code context. The code alone does not confirm a cause for your vehicle; use the applicable issue card and its sources.
Frequently asked questions
What does C1259 mean?
C1259 stands for "Manufacturer-Specific Chassis Code (Wheel-Speed Comparison or Steering Angle Sensor)." C1259 is a manufacturer-specific chassis code whose meaning varies by maker; reported definitions include a wheel-speed comparison failure (for example, right front speed signal comparison) and, on Hyundai/Kia, a steering angle sensor electrical malfunction, and it also appears on some hybrid brake systems. In general it indicates that a chassis/stability control module detected an implausible signal or electrical fault in a monitored sensor input. When set, ABS and traction/stability control are usually affected and the related warning lights come on. Confirm the exact definition for your specific make and model with a capable scan tool or factory service manual.
What are the most common causes of C1259?
The most common causes of C1259 are: Faulty wheel speed sensor or steering angle sensor, Steering angle sensor not calibrated (after alignment/repair), Wiring or connector fault in the sensor circuit, Damaged tone ring or implausible wheel-speed data, ABS/stability or hybrid brake control module fault, Low or unstable system voltage / poor ground. The specific cause varies by vehicle.
How much does it cost to fix C1259?
Repair costs for C1259 range from $250 to $2,200, depending on the vehicle and root cause.
Which vehicles are affected by C1259?
Au7o has documented C1259 across 1 vehicle models from 1 manufacturers: Hyundai.
Content compiled with AI assistance using NHTSA complaints, TSBs, and owner reports. May contain errors. Always verify with your vehicle's service manual.