C1564 on 2021-2025 Kia K5 — Vehicle Speed Data Invalid
1 vehicles · 1 makes
How to diagnose and fix C1564: most-reported vehicles
Ranked by owner reports. Each card gives the symptoms, how to confirm the cause, the fix, parts and sources for that vehicle.
Kia K5 · 2021–2025
The Advanced Driver Assistance Systems on the K5 — including Lane Keep Assist, Forward Collision Avoidance, and Blind Spot Monitoring — intermittently throw calibration faults and disable themselves. The forward-facing camera behind the windshield and radar sensor in the front bumper are sensitive to windshield contamination, extreme temperatures, and minor front-end impacts. After a windshield replacement, the ADAS sensors require recalibration that many glass shops skip or perform incorrectly.
Common Symptoms
- Lane Keep Assist warning light and system disabled
- Forward Collision warning malfunction message
- Blind Spot Monitor not functioning
- Multiple ADAS warning lights on dashboard
- Systems disabling in rain, fog, or extreme cold
- Phantom braking from Forward Collision system
How to Fix
For intermittent faults in normal conditions: clean the windshield interior and exterior thoroughly around the camera area. Ensure the camera lens cover behind the rearview mirror is clean and unobstructed. A dealer scan and ADAS recalibration costs $200-$500. After windshield replacement, ALWAYS have the ADAS camera recalibrated at a Kia dealer — this requires specialized targets and equipment. If faults persist, the camera module or radar sensor may need replacement ($500-$1,500).
Owner tips & cautions
- WarningIf you get your windshield replaced, INSIST on ADAS recalibration. The camera must be recalibrated to the new windshield or your safety systems will not function correctly. Budget $300-$500 for this.
Sources for this issue (1)
Find C1564 by make
Browse every documented model and issue for your make.
C1564 code reference
General diagnostic-code context. The code alone does not confirm a cause for your vehicle; use the applicable issue card and its sources.
Frequently asked questions
What does C1564 mean?
C1564 stands for "Vehicle Speed Data Invalid." C1564 is a manufacturer-specific chassis code (documented on Mitsubishi) set when the module receives abnormal or implausible vehicle-speed signal data. The system compares the incoming speed information for consistency, and repeated invalid values cause it to flag the fault and disable functions that depend on accurate speed. Effects can include disabled stability/traction features and related warning lights. Because this is a manufacturer code, confirm the exact definition against the factory manual.
What are the most common causes of C1564?
The most common causes of C1564 are: Faulty wheel/vehicle speed sensor, Implausible or noisy speed signal on the network, Damaged wiring or connectors, Communication fault between modules, Low system voltage or poor ground, Control module fault. The specific cause varies by vehicle.
How much does it cost to fix C1564?
Repair costs vary widely depending on the root cause and vehicle.
Which vehicles are affected by C1564?
Au7o has documented C1564 across 1 vehicle models from 1 manufacturers: Kia.
Content compiled with AI assistance using NHTSA complaints, TSBs, and owner reports. May contain errors. Always verify with your vehicle's service manual.