Known Issues/P0019/Cadillac

P0019 on Cadillac

Crankshaft/Camshaft Position Correlation - Bank 2 Sensor B

Critical3 Cadillac models affectedSystem: Engine
NewAI Photo & Video Diagnosis
Not sure this is what you've got?
Upload a photo or video — Au7o will confirm the match and check for other common failures at the same time.
Upload & confirm

P0019 on Cadillac vehicles indicates crankshaft/camshaft position correlation - bank 2 sensor b. Au7o has documented this code across 3 Cadillac models — most commonly on SRX, STS, XTS. This code means the engine computer detected that the crankshaft and camshaft positions on bank 2 (sensor B, typically the exhaust camshaft) are out of their expected correlation — in other words, the cam and crank timing don't line up correctly. The computer compares the crankshaft and camshaft position sensor signals to verify valve timing, which is often controlled by a variable valve timing (VVT) actuator. A correlation error points to mistimed valve events, frequently from oil-flow or VVT issues, a stretched timing chain, or sensor faults. You may notice rough idle, reduced power, poor fuel economy, or a check-engine light, and ignoring it can risk engine damage.

Common Causes of P0019

  • •Stretched or worn timing chain (and worn guides/tensioner)
  • •Faulty variable valve timing (VVT) actuator/solenoid (Bank 2)
  • •Low oil level or dirty/sludged oil restricting VVT flow
  • •Faulty camshaft or crankshaft position sensor
  • •Clogged VVT oil control valve screen
  • •Damaged sensor wiring or connector
  • •Jumped/misaligned timing during prior service

P0019 on Cadillac by Model

Cadillac SRX(1 issue)

  • High-Feature V6 Timing-Chain DTCs Require Exact Kit Identification2010-2012

    GM bulletin 12-06-01-009E covers listed 2010-2012 SRX High Feature V6 applications when worn timing chains set P0008, P0009 or P0016-P0019. It identifies application-specific service kits and warns that sprockets, actuators and guides should not be replaced automatically; guides are replaced only when wear reaches the base friction material.

Cadillac STS(1 issue)

  • 3.6L V6 Timing-Chain DTCs Require Exact Kit and Guide Inspection2007-2011

    GM bulletin 12-06-01-009E covers listed 2007-2011 STS 3.6L High Feature V6 applications when worn timing chains set P0008, P0009 or P0016-P0019. It identifies application-specific service kits and warns that sprockets, actuators and guides should not be replaced automatically; guides are replaced only when wear reaches the base friction material.

Cadillac XTS(1 issue)

  • Multiple Cam/Crank Correlation DTCs Require Chain, Tensioner and Reluctor Diagnosis2013-2019

    GM PIP3423P covers 2013-2019 XTS vehicles with the 3.6L LFX or LF3 engine when two or more of P0008, P0009 and P0016-P0019 are present. GM directs technicians to check for loose chains or tensioners and, if normal SI diagnosis does not find the cause, inspect whether the crankshaft-sensor reluctor moved. The bulletin does not establish automatic chain replacement.

Looking for P0019 on a different make?

View P0019 across all makes →

Frequently Asked Questions

What does P0019 mean on Cadillac?▼

P0019 stands for "Crankshaft/Camshaft Position Correlation - Bank 2 Sensor B." This code means the engine computer detected that the crankshaft and camshaft positions on bank 2 (sensor B, typically the exhaust camshaft) are out of their expected correlation — in other words, the cam and crank timing don't line up correctly. The computer compares the crankshaft and camshaft position sensor signals to verify valve timing, which is often controlled by a variable valve timing (VVT) actuator. A correlation error points to mistimed valve events, frequently from oil-flow or VVT issues, a stretched timing chain, or sensor faults. You may notice rough idle, reduced power, poor fuel economy, or a check-engine light, and ignoring it can risk engine damage. On Cadillac specifically, this code is documented across 3 models.

What causes P0019 on Cadillac vehicles?▼

Common causes on Cadillac: Stretched or worn timing chain (and worn guides/tensioner), Faulty variable valve timing (VVT) actuator/solenoid (Bank 2), Low oil level or dirty/sludged oil restricting VVT flow, Faulty camshaft or crankshaft position sensor, Clogged VVT oil control valve screen. Specific causes vary by model and year — see the per-model sections below.

How much does it cost to fix P0019 on a Cadillac?▼

Repair costs vary widely depending on the root cause and specific Cadillac model.

Which Cadillac models have P0019 documented?▼

Au7o has documented P0019 on 3 Cadillac models: SRX, STS, XTS.

Share:@au7o.io