C0050 on Jeep
Right Rear Wheel Speed Sensor Circuit
C0050 on Jeep vehicles indicates right rear wheel speed sensor circuit. Au7o has documented this code across 1 Jeep model — most commonly on Wrangler. This is a brake/ABS-system code. The right rear wheel speed sensor reports how fast that wheel spins so the anti-lock brake, traction control, and stability systems can do their job. C0050 means the ABS module detected an electrical fault in the right rear wheel speed sensor circuit — an open, short, or an erratic/out-of-range signal. This usually turns on the ABS and traction/stability warning lights and may disable those features, though standard braking remains available. Typical repair costs on Jeep range from $150 to $600, depending on the specific model and root cause.
Common Causes of C0050
- •Failed right rear wheel speed sensor
- •Damaged, corroded or disconnected sensor wiring/connector
- •Damaged or rusty tone/reluctor ring (missing or clogged teeth)
- •Excessive air gap between sensor and tone ring
- •Wheel bearing wear affecting an integrated sensor
- •Moisture or corrosion in the connector
- •Faulty ABS control module (less common)
C0050 on Jeep by Model
Jeep Wrangler(1 issue)
- Front Wheel Hub/Bearing Assembly Failure (Integrated ABS Sensor) — Grinding & ABS Light2007-2025
Front (and sometimes rear) sealed wheel hub/bearing assemblies are a high-wear item on JK and JL Wranglers, especially on lifted rigs running larger tires that load the bearing harder. As the bearing wears it produces a speed-dependent grinding, rumbling, or humming that changes when turning, and free play can be felt by rocking the tire at the 12-and-6 positions. Because the ABS wheel-speed sensor (tone ring/sensor) is integrated into the hub assembly on these models, a failing hub commonly damages the sensor and triggers ABS and traction-control (ESC) warning lights along with disabled stability control. The common service hub assembly for 2007-2016 5-lug JK with ABS is part 513272 (Mopar/MOOG/Timken/Spicer equivalents); note a JK hub part-number change around 2011, so the correct year-specific part must be used.
Looking for C0050 on a different make?
View C0050 across all makes →Frequently Asked Questions
What does C0050 mean on Jeep?▼
C0050 stands for "Right Rear Wheel Speed Sensor Circuit." This is a brake/ABS-system code. The right rear wheel speed sensor reports how fast that wheel spins so the anti-lock brake, traction control, and stability systems can do their job. C0050 means the ABS module detected an electrical fault in the right rear wheel speed sensor circuit — an open, short, or an erratic/out-of-range signal. This usually turns on the ABS and traction/stability warning lights and may disable those features, though standard braking remains available. On Jeep specifically, this code is documented across 1 model.
What causes C0050 on Jeep vehicles?▼
Common causes on Jeep: Failed right rear wheel speed sensor, Damaged, corroded or disconnected sensor wiring/connector, Damaged or rusty tone/reluctor ring (missing or clogged teeth), Excessive air gap between sensor and tone ring, Wheel bearing wear affecting an integrated sensor. Specific causes vary by model and year — see the per-model sections below.
How much does it cost to fix C0050 on a Jeep?▼
Repair costs on Jeep range from $150 to $600, depending on the specific model and root cause.
Which Jeep models have C0050 documented?▼
Au7o has documented C0050 on 1 Jeep model: Wrangler.