P0692 on 2021-2023 Jeep Grand Wagoneer — Fan 1 Control Circuit High
1 vehicles · 1 makes · $450-$1,600 repair
Most Reported On
P0692 is an OBD-II diagnostic trouble code meaning “Fan 1 Control Circuit High.” This code means the engine computer detected high voltage (or an open circuit) in the control circuit for cooling fan 1. The PCM commands the fan through a relay and watches the circuit voltage; a high reading usually indicates an open or a relay/wiring fault. If the fan fails to run, the engine can overheat at idle or in slow traffic. This code is most commonly reported on 2021-2023 Jeep Grand Wagoneer, with repair costs ranging from $450 to $1,600.
Common Causes
Typical Repair Cost
Based on 1 documented vehicle-specific issues. Actual cost depends on root cause and vehicle.
Diagnostic Tools
This is a powertrain code, so a basic OBD-II reader can read it. These read P0692.
ANCEL AD310 Classic OBD-II Scanner
by ANCEL
A simple code reader for engine (P) codes on many compatible OBD-II vehicles. It does not support every vehicle or hybrid/EV application, and it does NOT read body, chassis or network codes; confirm exact-vehicle compatibility before buying.
- Read & clear engine (P) codes
- View freeze frame data
- I/M readiness status
- No batteries or app needed
BlueDriver Pro Bluetooth Scanner
by BlueDriver
Bluetooth scanner with a companion app that reads beyond the engine module — ABS, SRS and transmission — plus manufacturer-specific codes on many vehicles.
- Enhanced diagnostics (ABS, SRS, transmission)
- Repair Reports with verified fixes
- Smog check readiness
- Free app (iOS & Android)
LAUNCH CRP123X V3.0 Elite OBD-II Scanner
by LAUNCH
Handheld scanner covering the four major systems (engine, transmission, ABS, SRS) with live data streaming and graphing.
- Engine, transmission, ABS, SRS diagnostics
- Live data stream & graphing
- AutoVIN for vehicle identification
- Free lifetime updates via Wi-Fi
Autel MaxiCOM MK808S Diagnostic Tool
by Autel
Shop-level tablet with all-system coverage and bi-directional control, so you can command a module rather than only read it.
- All-system diagnostics (25+ modules)
- Bi-directional control & active tests
- Oil reset, EPB, BMS, TPMS, injector coding
- 7-inch touchscreen with Android OS
What you can do yourself, and what needs a shop
Reading the code, clearing it, and watching whether it returns is a driveway job with the right scanner. These steps are not:
- Module programming or software updates — needs the manufacturer software or a J2534 pass-through with a paid subscription.
- Replacing a control module — most are VIN-programmed and immobilizer-registered, so a new one does nothing until it is coded to your car.
- Airbag/SRS component work — a stored fault can deploy a live device.
If the vehicle is still under warranty, check for an open recall or technical service bulletin before buying anything — the repair may already be covered.
As an Amazon Associate, we earn from qualifying purchases. Prices are approximate and may vary.
FAQ
What does P0692 mean?
P0692 stands for "Fan 1 Control Circuit High." This code means the engine computer detected high voltage (or an open circuit) in the control circuit for cooling fan 1. The PCM commands the fan through a relay and watches the circuit voltage; a high reading usually indicates an open or a relay/wiring fault. If the fan fails to run, the engine can overheat at idle or in slow traffic.
What are the most common causes of P0692?
The most common causes of P0692 are: Faulty cooling fan relay, Open circuit in the fan control wiring, Failed cooling fan motor, Corroded or disconnected fan connector, Blown fuse feeding the fan circuit, PCM control driver fault. The specific cause varies by vehicle.
How much does it cost to fix P0692?
Repair costs for P0692 range from $450 to $1,600, depending on the vehicle and root cause.
Which vehicles are affected by P0692?
Au7o has documented P0692 across 1 vehicle models from 1 manufacturers: Jeep.
Content compiled with AI assistance using NHTSA complaints, TSBs, and owner reports. May contain errors. Always verify with your vehicle's service manual.