According to Au7o's analysis of 1,500+ owner reports, the 2021 Lexus GX has 2 documented known issues. No issues are rated critical, indicating generally reliable ownership. The most commonly reported issue is AHC (Adaptive Hydraulic) Suspension Leak with 1,500 owner reports. Across all issues with published estimates, repair costs range from $1,000 to $3,500. DIY maintenance guides at au7o.io.
On the 2010-2023 Lexus GX 4.6L 1UR-FE, the Kinetic Dynamic Suspension System (KDSS) on the GX460 develops hydraulic fluid leaks from the stabilizer bar actuators and hydraulic lines. Leaks cause the KDSS warning light to illuminate and the system to become inoperative, resulting in increased body roll and a less controlled ride. The front actuators are the most common failure point.
Replace the leaking KDSS actuator(s) and hydraulic lines. Refill and bleed the system with the correct Toyota KDSS fluid. Both front and rear actuators should be inspected even if only one is leaking. Some owners disconnect the KDSS system and install conventional sway bars.
What you need to fix it
Only diagnosis- and fitment-reviewed repair parts are linked here.
48080-60020 genuine Lexus rear-right pneumatic air spring
OEM48080-60020
Replace a pressure-tested leaking right rear air spring on a pneumatic-height-control GX460 Fitment/availability: Live page explicitly fits 2010-2023 GX460 Z trim, rear passenger side.
48090-60020 genuine Lexus rear-left pneumatic air spring
OEM48090-60020
Replace a pressure-tested leaking left rear air spring on a pneumatic-height-control GX460 Fitment/availability: Live page explicitly fits 2010-2023 GX460 Z trim, rear driver side.
48007-60023 genuine Lexus front KDSS stabilizer cylinder with tube
OEM48007-60023
Replace a confirmed leaking or failed front KDSS hydraulic cylinder Fitment/availability: Live page fits 2010-2023 GX460 G/Z and supersedes 48007-60020/21/22.
Replace a confirmed leaking or failed rear KDSS hydraulic cylinder Fitment/availability: Live page fits 2010-2023 GX460 G/Z and supersedes 48886-60030/31.
Replace a diagnosed failed or leaking KDSS accumulator/control housing Fitment/availability: Live page fits 2010-2023 GX460 G/Z and supersedes 48006-60030. Confirm leak source and system pressure; not a pneumatic height-control compressor.
As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.
Owner tips & cautions
TipCheck KDSS actuators during every oil change by looking for fluid residue on the front and rear stabilizer bars. Catching a leak early prevents damage to the hydraulic pump.
High Confidence1,500 owner reportsLast reported by owners Feb 2026Reviewed Mar 2026
On the 2010-2023 Lexus GX, a persistent complaint across the entire GX 460 production run is that the truck sits noticeably lower on the right side, commonly around an inch. It affects many but not all examples and shows up on vehicles with and without the AHC hydraulic system. On AHC-equipped trucks the cause is usually within the height control system — a failing height control sensor or accumulator pressure loss — and is correctable. On non-AHC trucks the lean is generally a combination of spring rate tolerance, the asymmetric weight of the fuel tank and driveline, and settled springs on an older vehicle, and it is not a fault so much as an accumulation of tolerances. The distinction matters because the two situations call for completely different responses.
Common Symptoms
Vehicle sits roughly an inch lower on the right side
Uneven fender-to-ground measurements when unloaded
Uneven tire wear across the vehicle
AHC system slow to level or unable to hold height
Lean more pronounced after the vehicle has been parked
How to Fix
Measure before diagnosing: park on genuinely level ground, ensure the tires are at equal pressure, and measure from the ground to the same point on each fender at all four corners with the vehicle unloaded. Note that a half-tank of fuel and a heavy set of tools in one side of the cargo area account for more lean than owners expect. On AHC-equipped trucks, have the height control sensors read on a scan tool and the accumulator pressure checked before replacing anything — a failing sensor is a far more common and cheaper cause than a failed sphere. On non-AHC trucks, if the lean is genuinely a settled spring, replacing the springs in axle pairs restores it; never shim or spacer only one side to mask a lean without first confirming the springs and the frame are sound. If the lean appeared suddenly rather than gradually, stop treating it as a tolerance issue and inspect for a broken spring, a failed shock, or accident damage.
What you need to fix it
Only diagnosis- and fitment-reviewed repair parts are linked here.
Replace a scan-confirmed failed right rear height sensor on the matching equipped vehicle Fitment/availability: Live Add to Cart page lists 2010-2023 GX460 G/Z and rear passenger position. For pneumatic ride-height diagnosis, confirm Z-t…
Replace a scan-confirmed failed left rear height sensor Fitment/availability: Live Add to Cart page explicitly lists 2010-2023 GX460 Z trim, rear driver position. Confirm VIN and compare live sensor values before ordering.
Replace confirmed settled or broken conventional rear coil springs as an axle pair Fitment/availability: Live Add to Cart page explicitly lists 2010-2023 GX460 G trim. The same SKU fits both rear positions but is sold individually, so qu…
Supply the driver-side member of a confirmed front spring pair repair Fitment/availability: Live Add to Cart page explicitly lists 2010-2023 GX460 G/Z and driver-side position. Pair with the distinct RH spring and confirm VIN/option code.
Supply the passenger-side member of a confirmed front spring pair repair Fitment/availability: Live Add to Cart page explicitly lists 2010-2023 GX460 G/Z and passenger-side position. Pair with the distinct LH spring and confirm VIN/optio…
According to Au7o's analysis of 1,500+ owner reports, the 2021 Lexus GX has 2 documented issues. The most frequently reported are: AHC (Adaptive Hydraulic) Suspension Leak, Uneven Ride Height — Vehicle Sits Lower on the Right Side. None are rated critical, but regular maintenance is recommended.
Is the Lexus GX reliable?
The 2021 Lexus GX has 2 known issues documented across 1,500+ owner reports. No issues are rated critical, suggesting generally good reliability. Regular maintenance following the manufacturer's schedule helps prevent many common problems.
How much does it cost to fix common Lexus GX problems?
Repair costs for known Lexus GX issues range from $0 to $3,500, depending on the specific problem and whether you choose DIY or professional repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.
What is the 2010-2023 Lexus GX AHC (Adaptive Hydraulic) Suspension Leak?
The Kinetic Dynamic Suspension System (KDSS) on the GX460 develops hydraulic fluid leaks from the stabilizer bar actuators and hydraulic lines. Leaks cause the KDSS warning light to illuminate and the system to become inoperative, resulting in increased body roll and a less contr… Repairs typically run $1,000-$3,500. Severity: medium.
What is the 2010-2023 Lexus GX Uneven Ride Height — Vehicle Sits Lower on the Right Side?
A persistent complaint across the entire GX 460 production run is that the truck sits noticeably lower on the right side, commonly around an inch. It affects many but not all examples and shows up on vehicles with and without the AHC hydraulic system. On AHC-equipped trucks the c… Repairs typically run $0-$2,000. Severity: low.
Content on this page was compiled with AI assistance using NHTSA complaints, TSBs, owner reports, and public automotive data. While we strive for accuracy, this information may contain errors. Always verify repair procedures and specifications with your vehicle's service manual or a qualified mechanic.
