P0304 on Lexus
Cylinder 4 Misfire Detected
P0304 on Lexus vehicles indicates cylinder 4 misfire detected. Au7o has documented this code across 2 Lexus models — most commonly on IS, RC. This code means the engine computer detected a misfire in cylinder number 4 — that cylinder isn't igniting its air-fuel mixture fully or at all. The system detects this by monitoring small changes in crankshaft rotation speed as each cylinder fires. You may feel a rough idle, shaking, hesitation or reduced power, and a persistent misfire can dump unburned fuel into the exhaust and overheat or damage the catalytic converter. Since it's pinpointed to one cylinder, the problem typically lies in that cylinder's spark, fuel, or compression. Typical repair costs on Lexus range from $250 to $900, depending on the specific model and root cause.
Common Causes of P0304
- •Worn or fouled spark plug in cylinder 4
- •Failed or weak ignition coil on cylinder 4
- •Faulty spark plug wire or boot (where applicable)
- •Clogged, stuck or leaking fuel injector for cylinder 4
- •Vacuum or intake air leak near that cylinder
- •Low compression (worn rings, burnt/leaking valve, head gasket)
- •Damaged wiring or connector at the coil or injector
P0304 on Lexus by Model
Lexus IS(2 issues)
- Carbon Buildup on Intake Valves (2.0T)2016-2022
The direct-injected 2.0L turbo four-cylinder in the IS200t/IS300 accumulates heavy carbon deposits on the intake valves since fuel is not sprayed over the valves to clean them. This leads to rough idle, hesitation under acceleration, and reduced power output typically between 40,000-80,000 miles.
- Valve Cover Gasket Leaks Causing Oil Smell and Misfire Risk2001-2005
Aging valve cover gaskets on the 2JZ-GE commonly harden and leak, allowing oil to seep onto the cylinder head, spark plug tube seals, and exhaust side of the engine. Owners often notice a burnt-oil smell, visible oil around the valve covers, and occasional misfires if oil contaminates ignition components. This is one of the most common age-related engine leaks on the first-gen IS300.
Lexus RC(1 issue)
- Carbon Buildup on Intake Valves (2.0T)2016-2022
The direct-injected 2.0L turbo in the RC200t and RC300 accumulates carbon deposits on the intake valves identically to the IS with the same engine. Without port injection to wash the valves, carbon buildup causes progressive performance degradation starting around 40,000 miles.
Looking for P0304 on a different make?
View P0304 across all makes →Frequently Asked Questions
What does P0304 mean on Lexus?▼
P0304 stands for "Cylinder 4 Misfire Detected." This code means the engine computer detected a misfire in cylinder number 4 — that cylinder isn't igniting its air-fuel mixture fully or at all. The system detects this by monitoring small changes in crankshaft rotation speed as each cylinder fires. You may feel a rough idle, shaking, hesitation or reduced power, and a persistent misfire can dump unburned fuel into the exhaust and overheat or damage the catalytic converter. Since it's pinpointed to one cylinder, the problem typically lies in that cylinder's spark, fuel, or compression. On Lexus specifically, this code is documented across 2 models.
What causes P0304 on Lexus vehicles?▼
Common causes on Lexus: Worn or fouled spark plug in cylinder 4, Failed or weak ignition coil on cylinder 4, Faulty spark plug wire or boot (where applicable), Clogged, stuck or leaking fuel injector for cylinder 4, Vacuum or intake air leak near that cylinder. Specific causes vary by model and year — see the per-model sections below.
How much does it cost to fix P0304 on a Lexus?▼
Repair costs on Lexus range from $250 to $900, depending on the specific model and root cause.
Which Lexus models have P0304 documented?▼
Au7o has documented P0304 on 2 Lexus models: IS, RC.