What are the most common Ford F-100 problems?
According to Au7o's research across NHTSA recalls, manufacturer TSBs, and owner forum reports, the 1973 Ford F-100 has 4 documented issues. The most frequently reported are: Cab Corner, Floor Pan & Rocker Rust (Structural Body Corrosion), Twin I-Beam Kingpin & Front-End Wear (Wandering, Vague Steering), 6V Generator & Points Ignition — Weak, Outdated Charging/Spark. Of these, 2 are rated critical and should be addressed promptly.
Is the Ford F-100 reliable?
The 1973 Ford F-100 has 4 known issues compiled from NHTSA recalls, manufacturer TSBs, and owner forum reports. 2 issues are rated critical: Cab Corner, Floor Pan & Rocker Rust (Structural Body Corrosion) and Twin I-Beam Kingpin & Front-End Wear (Wandering, Vague Steering). Prospective buyers should inspect for these issues and factor potential repair costs into their purchase decision. Regular maintenance following the manufacturer's schedule helps prevent many common problems.
How much does it cost to fix common Ford F-100 problems?
Repair costs for known Ford F-100 issues range from $150 to $6,000, depending on the specific problem and whether you choose DIY or professional repair. The most critical issue, Cab Corner, Floor Pan & Rocker Rust (Structural Body Corrosion), typically costs $800-$6,000 to repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.
What is the 1957-1979 Ford F-100 Cab Corner, Floor Pan & Rocker Rust (Structural Body Corrosion)?
Six-plus decades of moisture trapped in the cab attack the lower structure: cab corners, floor pans and their support braces, inner and outer rockers, lower doors, cab mounts, and bed sides/wheel arches. Period weatherstripping leaks, dirt and leaves pack the cowl and floor, and… Repairs typically run $800-$6,000. Severity: high.
What is the 1965-1979 Ford F-100 Twin I-Beam Kingpin & Front-End Wear (Wandering, Vague Steering)?
From 1965 the F-100 used Ford's Twin I-Beam front suspension with kingpins (not ball joints) pivoting the spindles, plus tie-rod ends, drag link, and the I-beam radius-arm (strut) bushings. After decades of service the kingpins and their bronze bushings wear oval, the tie-rod end… Repairs typically run $500-$3,500. Severity: high.
What is the 1957-1976 Ford F-100 6V Generator & Points Ignition — Weak, Outdated Charging/Spark?
Earlier F-100s use a 6-volt, positive-ground generator system with points-and-condenser ignition. The 6V generator barely keeps up even stock, won't support a cooling fan, electronic ignition, or any modern accessory, and replacement/repair parts are getting scarce. Points wander… Repairs typically run $200-$800. Severity: medium.
What is the 1957-1979 Ford F-100 Ethanol-Era Vapor Lock & Carburetor Fuel Boil?
These trucks were engineered for 1950s-70s leaded fuel and use a mechanical fuel pump feeding a carburetor through narrow steel lines routed near the hot exhaust. Modern E10 ethanol gasoline vaporizes 20-30% more readily, so on hot days the fuel boils in the line or carburetor bo… Repairs typically run $150-$900. Severity: medium.
