Jeep Avenger Problems: 3 Issues Every Owner Should Know
2023-2024 model years · Based on 300+ owner reports · Last updated March 2026
According to Au7o's analysis of 300+ owner reports, the 2023-2024 Jeep Avenger has 3 documented known issues, with 2 rated critical by the Au7o research team. The most serious are ADAS Front Camera Hardware Fault Disabling Safety Systems ($0-$0 repair) and Steering Rack Out of Specification Causing Handling Issues ($0-$0 repair). The most commonly reported issue is ADAS Front Camera Hardware Fault Disabling Safety Systems with 120 owner reports. Across all issues, repair costs range from $0 to $300. Full technical analysis and DIY maintenance guides at au7o.io.
All 3 Known Issues
Certain Jeep Avenger vehicles were equipped with a front camera containing an incorrect hardware level ID, causing an internal error code that keeps the Advanced Driver Assistance System (ADAS) permanently inactive. This disables Automatic Emergency Braking (AEB) and Lane Keep Assist (LKA) simultaneously, leaving the vehicle without critical active safety features. Stellantis issued a recall to address the faulty camera hardware.
Common Symptoms
- ADAS warning lights illuminated on dashboard
- Lane Keep Assist not functioning or unavailable
- Automatic Emergency Braking system disabled
- Forward collision warning not activating
- Error message related to camera or driver assistance system
How to Fix
Contact a Jeep dealer to have the front camera module replaced under the manufacturer recall. The dealer will install a camera with the correct hardware ID and verify that AEB and LKA functions are fully operational. This repair is performed at no cost under the recall campaign.
What Owners Are Using
Parts and tips from 120+ owners who fixed this issue
- TipCheck your VIN on the NHTSA website or Stellantis recall portal to confirm whether your Avenger is affected by this camera recall before visiting the dealer.
The Jeep Avenger's 1.2L mild hybrid powertrain experiences frequent Start & Stop system malfunctions. The system may fail to restart the engine properly, cause delayed or sluggish restarts, or stall the engine entirely during stop-and-go driving. The issue is linked to the mild hybrid system's integration with the 48V electrical architecture and MCU software calibration.
Common Symptoms
- Engine fails to restart after automatic stop at traffic lights
- Delayed or slow engine restart when releasing brake pedal
- Random engine stalling while driving at low speeds
- Start & Stop warning light illuminated on dashboard
- Jerky transitions between electric assist and engine power
How to Fix
Visit a Jeep dealer for an MCU (Motor Control Unit) software update that recalibrates the Start & Stop system behavior. The dealer will check error logs and reflash the MCU with updated firmware. If the issue persists after the software update, the 48V battery or belt-starter-generator (BSG) may need inspection or replacement.
What Owners Are Using
Parts and tips from 85+ owners who fixed this issue
- TipRequest an MCU software update at your first dealer visit — many stalling and Start & Stop issues are resolved by a firmware reflash alone.
- TipIf the Start & Stop system is acting erratically, you can manually disable it each drive by pressing the Start & Stop button on the console until a permanent software fix is applied.
Some Jeep Avenger vehicles were fitted with a steering rack that does not conform to manufacturer specifications. The defective rack can cause vague or inconsistent steering feel, pulling to one side, and in severe cases, reduced steering control. Stellantis issued a recall to inspect and replace affected steering racks.
Common Symptoms
- Steering feels vague or loose at center position
- Vehicle pulls to one side during straight-line driving
- Uneven steering response when turning left vs. right
- Clunking or clicking noise from steering column area
- Increased steering effort at low speeds
How to Fix
Visit a Jeep dealer for a steering rack inspection under the recall campaign. If the rack is found to be out of specification, it will be replaced at no cost. Do not ignore any changes in steering feel, as the issue can worsen over time.
What Owners Are Using
Parts and tips from 95+ owners who fixed this issue
- TipEven if you have not received a recall notice, have the dealer inspect the steering rack if your Avenger exhibits any pulling or vague steering — early detection prevents further wear on tires and suspension components.
Frequently Asked Questions
What are the most common Jeep Avenger problems?
According to Au7o's analysis of 300+ owner reports, the 2023-2024 Jeep Avenger has 3 documented issues. The most frequently reported are: ADAS Front Camera Hardware Fault Disabling Safety Systems, Steering Rack Out of Specification Causing Handling Issues, Start-Stop System Malfunction and Engine Stalling. Of these, 2 are rated critical and should be addressed promptly.
Is the Jeep Avenger reliable?
The 2023-2024 Jeep Avenger has 3 known issues documented across 300+ owner reports. 2 issues are rated critical: ADAS Front Camera Hardware Fault Disabling Safety Systems and Steering Rack Out of Specification Causing Handling Issues. Prospective buyers should inspect for these issues and factor potential repair costs into their purchase decision. Regular maintenance following the manufacturer's schedule helps prevent many common problems.
How much does it cost to fix common Jeep Avenger problems?
Repair costs for known Jeep Avenger issues range from $0 to $300, depending on the specific problem and whether you choose DIY or professional repair. The most critical issue, ADAS Front Camera Hardware Fault Disabling Safety Systems, typically costs $0-$0 to repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.
Get DIY Repair Guides for Your Jeep Avenger
AI-powered step-by-step repair and maintenance guides tailored to your exact vehicle. Enter your year, make, and model to get started.
Get Started Free