What are the most common Mazda Protege problems?
According to Au7o's analysis of 140+ owner reports, the 1993 Mazda Protege has 5 documented issues. The most frequently reported are: Ignition switch may overheat and catch fire (Recall 15V674000), 1.8L BP head gasket failure and cooling-system age wear, Thermostat Sticking and Overheating. Of these, 2 are rated critical and should be addressed promptly.
Is the Mazda Protege reliable?
The 1993 Mazda Protege has 5 known issues documented across 140+ owner reports. 2 issues are rated critical: Ignition switch may overheat and catch fire (Recall 15V674000) and 1.8L BP head gasket failure and cooling-system age wear. Prospective buyers should inspect for these issues and factor potential repair costs into their purchase decision. Regular maintenance following the manufacturer's schedule helps prevent many common problems.
How much does it cost to fix common Mazda Protege problems?
Repair costs for known Mazda Protege issues range from $80 to $2,500, depending on the specific problem and whether you choose DIY or professional repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.
What is the 1990-1998 Mazda Protege Ignition switch may overheat and catch fire (Recall 15V674000)?
NHTSA campaign 15V674000 and Mazda recall 8715J cover 1990-1998 Protege vehicles. Grease applied to ignition-switch contact points could become conductive and overheat, increasing fire risk. Mazda’s official remedy is dealer replacement of the ignition switch. The reviewed record… Severity: high.
What is the 1990-1998 Mazda Protege 1.8L BP head gasket failure and cooling-system age wear?
The 1.8L BP (and the smaller 1.5L/1.6L) can develop head-gasket failure as they accumulate miles, often triggered or accelerated by an aging cooling system - a stuck thermostat, tired radiator, failed fan motor, or slow coolant loss leading to an overheat event. Signs are overhea… Repairs typically run $1,200-$1,800. Severity: high.
What is the 1990-2003 Mazda Protege Thermostat Sticking and Overheating?
Thermostat sticks closed causing rapid overheating, or sticks open causing engine to run cold and poor heater output. Common failure on these engines past 80k miles. Repairs typically run $80-$250. Severity: medium.
What is the 1990-1998 Mazda Protege Distributor failure causing intermittent stalling and hot no-start?
First-generation Proteges (and 1.5L/1.6L second-gen cars) use a camshaft-driven distributor that houses the ignition pickup. With age these distributors suffer internal bearing wear and moisture intrusion past the seal, which corrodes the pickup and shaft. The result is a car tha… Repairs typically run $200-$550. Severity: medium.
What is the 1990-1998 Mazda Protege Structural rust: rocker panels, rear subframe/crossmember and strut towers?
In salt-belt climates these Proteges rust from the underside up. Owners report perforated lower rocker panels at the seams, rusted-out floor sections (notably the rear passenger area), and - most importantly for safety - corrosion of the rear subframe/crossmember and rear strut t… Repairs typically run $300-$2,500. Severity: medium.
