Known Issues/P0014/Dodge

P0014 on Dodge

Exhaust Camshaft Position Timing - Over-Advanced (Bank 1)

Moderate4 Dodge models affected$50-$2,500 typical repairSystem: Engine
NewAI Photo & Video Diagnosis
Not sure this is what you've got?
Upload a photo or video — Au7o will confirm the match and check for other common failures at the same time.
Upload & confirm

P0014 on Dodge vehicles indicates exhaust camshaft position timing - over-advanced (bank 1). Au7o has documented this code across 4 Dodge models — most commonly on Dakota, Dart, Durango. P0014 means the exhaust camshaft on bank 1 is timed too far advanced — the variable valve timing (VVT) system has moved the cam beyond the position the computer commanded, or it's stuck in an over-advanced position. The engine uses VVT to rotate the camshaft and optimize valve timing for power, economy, and emissions; the computer compares the commanded cam position to the actual reading from the cam sensor and flags this code when they don't agree. Common results are rough idle, reduced power, poor fuel economy, or a rattle at start-up. Oil flow and the VVT actuator are the usual suspects. Typical repair costs on Dodge range from $50 to $2,500, depending on the specific model and root cause.

Common Causes of P0014

  • •Low or dirty engine oil restricting VVT operation
  • •Stuck or failed camshaft oil control valve (VVT solenoid)
  • •Clogged VVT solenoid screen or oil passages
  • •Faulty camshaft phaser/actuator
  • •Wiring or connector fault at the oil control valve
  • •Stretched timing chain or jumped timing
  • •Camshaft position sensor fault giving incorrect reading

P0014 on Dodge by Model

Dodge Dakota(1 issue)

  • 4.7L V8 Timing Chain Tensioner Failure2000-2007

    The timing chain tensioner and guides wear prematurely, especially when incorrect oil weight is used (5W-30 instead of the required 5W-20). Causes rattling on startup, performance deterioration, and can lead to engine destruction if chain jumps.

Dodge Dart(1 issue)

  • MultiAir Solenoid Assembly Failure2013-2016

    The MultiAir variable valve timing solenoids fail causing check engine light with VVT codes, rough idle, loss of power, and poor fuel economy. Individual solenoids not available separately from Mopar - entire MultiAir assembly must be replaced.

Dodge Durango(1 issue)

  • Water Pump Failure (Pentastar V6)2011-2021

    The water pump on the 3.6L Pentastar V6 can fail, causing coolant leaks and overheating. The pump is internal and driven by the timing chain, making replacement labor-intensive. Typically fails between 80,000-120,000 miles.

Dodge Grand Caravan(1 issue)

  • Engine Oil Sludge Buildup (3.6L Pentastar V6)2011-2020

    The 3.6L Pentastar V6 in later Grand Caravans develops oil sludge and varnish buildup, particularly when oil changes are not performed at 5,000-mile intervals or when conventional oil is used. Sludge clogs the oil passages feeding the variable valve timing (VVT) system, causing camshaft actuator codes and rough running. The Pentastar is sensitive to oil quality and change intervals due to its VVT system and tight oil passages.

Looking for P0014 on a different make?

View P0014 across all makes →

Frequently Asked Questions

What does P0014 mean on Dodge?▼

P0014 stands for "Exhaust Camshaft Position Timing - Over-Advanced (Bank 1)." P0014 means the exhaust camshaft on bank 1 is timed too far advanced — the variable valve timing (VVT) system has moved the cam beyond the position the computer commanded, or it's stuck in an over-advanced position. The engine uses VVT to rotate the camshaft and optimize valve timing for power, economy, and emissions; the computer compares the commanded cam position to the actual reading from the cam sensor and flags this code when they don't agree. Common results are rough idle, reduced power, poor fuel economy, or a rattle at start-up. Oil flow and the VVT actuator are the usual suspects. On Dodge specifically, this code is documented across 4 models.

What causes P0014 on Dodge vehicles?▼

Common causes on Dodge: Low or dirty engine oil restricting VVT operation, Stuck or failed camshaft oil control valve (VVT solenoid), Clogged VVT solenoid screen or oil passages, Faulty camshaft phaser/actuator, Wiring or connector fault at the oil control valve. Specific causes vary by model and year — see the per-model sections below.

How much does it cost to fix P0014 on a Dodge?▼

Repair costs on Dodge range from $50 to $2,500, depending on the specific model and root cause.

Which Dodge models have P0014 documented?▼

Au7o has documented P0014 on 4 Dodge models: Dakota, Dart, Durango, Grand Caravan.

Share:@au7o.io