P0868 on Jaguar
Transmission Fluid Pressure Low
P0868 on Jaguar vehicles indicates transmission fluid pressure low. Au7o has documented this code across 1 Jaguar model — most commonly on XK. This code indicates the transmission's internal fluid pressure is reading lower than the computer expects for current operating conditions. The transmission control module uses a pressure sensor to monitor line pressure, which is what applies the clutches and bands that engage gears. When that pressure stays below the target threshold, P0868 sets. Low line pressure can cause slipping, harsh or delayed shifts, and in severe cases internal clutch damage, so it should be addressed promptly. Typical repair costs on Jaguar range from $900 to $3,000, depending on the specific model and root cause.
Common Causes of P0868
- •Low transmission fluid level
- •Worn or stuck-open pressure control solenoid
- •Internal leak (worn seals, gaskets, or valve body)
- •Faulty transmission fluid pressure sensor
- •Clogged transmission filter
- •Failing transmission (oil) pump
- •Worn or leaking valve body
- •Wiring or connector fault to the pressure sensor/solenoid
P0868 on Jaguar by Model
Jaguar XK(1 issue)
- ZF 6HP Automatic Transmission Mechatronic Bridge-Seal / Sealing-Sleeve Failure2007-2014
The ZF 6HP26 (2006-2009 4.2L cars) and ZF 6HP28 (2009-2014 5.0L cars) automatic used in the X150 XK develops internal hydraulic-pressure loss as the mechatronic unit ages. The 'bridge seal' adapter (the figure-8 sealing sleeve between the valve body/mechatronic and the transmission case) hardens and cracks, and the conductor plate/solenoids degrade, causing loss of line pressure. This is the single most common ZF 6HP fault and owners frequently misdiagnose it as a dead gearbox, replacing the whole unit when only the mechatronic seal or module is at fault. ATF that is never changed (Jaguar marketed it as fill-for-life) accelerates the failure. Well documented across the shared ZF 6HP platform (also used by BMW, Land Rover, Bentley, Maserati).
Looking for P0868 on a different make?
View P0868 across all makes →Frequently Asked Questions
What does P0868 mean on Jaguar?▼
P0868 stands for "Transmission Fluid Pressure Low." This code indicates the transmission's internal fluid pressure is reading lower than the computer expects for current operating conditions. The transmission control module uses a pressure sensor to monitor line pressure, which is what applies the clutches and bands that engage gears. When that pressure stays below the target threshold, P0868 sets. Low line pressure can cause slipping, harsh or delayed shifts, and in severe cases internal clutch damage, so it should be addressed promptly. On Jaguar specifically, this code is documented across 1 model.
What causes P0868 on Jaguar vehicles?▼
Common causes on Jaguar: Low transmission fluid level, Worn or stuck-open pressure control solenoid, Internal leak (worn seals, gaskets, or valve body), Faulty transmission fluid pressure sensor, Clogged transmission filter. Specific causes vary by model and year — see the per-model sections below.
How much does it cost to fix P0868 on a Jaguar?▼
Repair costs on Jaguar range from $900 to $3,000, depending on the specific model and root cause.
Which Jaguar models have P0868 documented?▼
Au7o has documented P0868 on 1 Jaguar model: XK.