What are the most common Peugeot 3008 problems?
According to Au7o's analysis of 205+ owner reports, the 2017 Peugeot 3008 has 6 documented issues. The most frequently reported are: DPF Premature Blockage, AdBlue System Malfunction, 1.2 PureTech Wet Timing Belt Degradation (Oil Contamination, Brake Assist Loss). Of these, 3 are rated critical and should be addressed promptly.
Is the Peugeot 3008 reliable?
The 2017 Peugeot 3008 has 6 known issues documented across 205+ owner reports. 3 issues are rated critical: DPF Premature Blockage and AdBlue System Malfunction and 1.2 PureTech Wet Timing Belt Degradation (Oil Contamination, Brake Assist Loss). Prospective buyers should inspect for these issues and factor potential repair costs into their purchase decision. Regular maintenance following the manufacturer's schedule helps prevent many common problems.
How much does it cost to fix common Peugeot 3008 problems?
Repair costs for known Peugeot 3008 issues range from $100 to $2,500, depending on the specific problem and whether you choose DIY or professional repair. The most critical issue, DPF Premature Blockage, typically costs $300-$2,500 to repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.
What is the 2009-2026 Peugeot 3008 DPF Premature Blockage?
The 3008 diesel variants experience premature DPF clogging, with the larger vehicle weight and urban usage patterns contributing to incomplete regeneration cycles. The issue is more pronounced in pre-2017 models with the older DPF design. Repairs typically run $300-$2,500. Severity: high.
What is the 2017-2026 Peugeot 3008 AdBlue System Malfunction?
The second-generation 3008 BlueHDi models are plagued by AdBlue system faults, including false level readings and crystallized injectors. The vehicle displays a countdown to engine disable even with a full AdBlue tank. Repairs typically run $300-$1,200. Severity: high.
What is the 2014-2022 Peugeot 3008 1.2 PureTech Wet Timing Belt Degradation (Oil Contamination, Brake Assist Loss)?
The 1.2 PureTech (EB2) three-cylinder petrol engine uses a timing belt that runs inside the engine oil ('wet belt'). The belt rubber degrades prematurely in aged or incorrect-spec oil, shedding particles that clog the oil pickup, oil ways and the brake vacuum pump, causing oil st… Repairs typically run $500-$2,500. Severity: high.
What is the 2014-2023 Peugeot 3008 EAT6 Automatic Gearbox Shudder?
The Aisin-sourced EAT6 six-speed automatic transmission exhibits judder and hesitation during low-speed manoeuvres and when pulling away from rest. Torque converter lockup calibration and fluid degradation are primary causes. Repairs typically run $200-$1,500. Severity: medium.
What is the 2009-2019 Peugeot 3008 BSI (Built-in Systems Interface) Module Faults Causing Erratic Electrics?
The BSI module is the central body-electronics hub on the 3008 (BSI2010 on the Mk1, BSI EL3 on the Mk2), controlling the immobiliser, central locking, lighting, wipers and dash communication. Thermal cycling cracks its solder joints (particularly around the central-locking relay)… Repairs typically run $100-$1,000. Severity: medium.
What is the 2017-2021 Peugeot 3008 i-Cockpit Infotainment (NAC) Touchscreen Black Screen / Freezing?
Second-generation 3008s with the i-Cockpit and NAC (Navigation Audio Connectée) head unit commonly suffer the central touchscreen going completely black, freezing, or rebooting in a loop every few minutes due to firmware bugs in the NAC software. Because climate control, reversin… Repairs typically run $100-$1,500. Severity: medium.
