P0174 on RAM
System Too Lean (Bank 2)
P0174 on RAM vehicles indicates system too lean (bank 2). Au7o has documented this code across 1 RAM model — most commonly on 3500. P0174 means the engine computer detected that the air-fuel mixture on Bank 2 (the side of the engine with cylinder 2) is running too lean — too much air relative to fuel. The computer monitors this through the oxygen/air-fuel sensors and fuel trims; when it has to add a large amount of extra fuel to compensate and still can't reach the target, it flags the mixture as too lean. A lean condition can cause rough idle, hesitation, or misfires, and over time can raise combustion temperatures. Because it's Bank 2 specific, an unmetered air leak on that bank or a fuel delivery shortfall is typical. Typical repair costs on RAM range from $200 to $4,000, depending on the specific model and root cause.
Common Causes of P0174
- •Vacuum or intake air leak (hoses, gaskets, PCV)
- •Dirty or failing mass airflow (MAF) sensor
- •Weak fuel pump or restricted fuel filter (low fuel pressure)
- •Clogged or underperforming fuel injectors
- •Leaking intake manifold or throttle body gasket
- •Faulty or contaminated oxygen / air-fuel sensor
- •Exhaust leak upstream of the oxygen sensor
- •Stuck-open EGR valve
P0174 on RAM by Model
RAM 3500(1 issue)
- 6.7L Cummins Exhaust Brake Actuator and VGT Turbo Issues2013-2025
The RAM 3500 6.7L Cummins equipped with the integrated exhaust brake system experiences failures of the VGT (Variable Geometry Turbocharger) actuator and exhaust brake solenoid. The exhaust brake uses the VGT turbo vanes to create backpressure for engine braking while towing. The electronic actuator (Holset HE351VE/HE300VG) sticks or fails due to carbon buildup, causing loss of exhaust brake function, reduced turbo performance, limp mode, and DTC codes P2263 or P006A. TSB 14-001-21 addresses VGT actuator calibration. Actuator replacement costs $800-1,500; complete turbo replacement is $2,500-4,000.
Looking for P0174 on a different make?
View P0174 across all makes →Frequently Asked Questions
What does P0174 mean on RAM?▼
P0174 stands for "System Too Lean (Bank 2)." P0174 means the engine computer detected that the air-fuel mixture on Bank 2 (the side of the engine with cylinder 2) is running too lean — too much air relative to fuel. The computer monitors this through the oxygen/air-fuel sensors and fuel trims; when it has to add a large amount of extra fuel to compensate and still can't reach the target, it flags the mixture as too lean. A lean condition can cause rough idle, hesitation, or misfires, and over time can raise combustion temperatures. Because it's Bank 2 specific, an unmetered air leak on that bank or a fuel delivery shortfall is typical. On RAM specifically, this code is documented across 1 model.
What causes P0174 on RAM vehicles?▼
Common causes on RAM: Vacuum or intake air leak (hoses, gaskets, PCV), Dirty or failing mass airflow (MAF) sensor, Weak fuel pump or restricted fuel filter (low fuel pressure), Clogged or underperforming fuel injectors, Leaking intake manifold or throttle body gasket. Specific causes vary by model and year — see the per-model sections below.
How much does it cost to fix P0174 on a RAM?▼
Repair costs on RAM range from $200 to $4,000, depending on the specific model and root cause.
Which RAM models have P0174 documented?▼
Au7o has documented P0174 on 1 RAM model: 3500.