2007 model year · NHTSA recalls, manufacturer TSBs, and owner forum reports · Updated July 2026
According to Au7o's research across NHTSA recalls, manufacturer TSBs, and owner forum reports, the 2007 Ford Fusion has 1 documented known issues. No issues are rated critical, indicating generally reliable ownership. Across all issues, repair costs range from $156 to $400. DIY maintenance guides at au7o.io.
On the 2006-2020 Ford Fusion, the plastic gears inside the HVAC blend-door actuator strip out, so the door can no longer move to route air correctly. The classic symptom is a repeated clicking or knocking noise from behind the dash (often at startup or when changing temperature), along with air stuck on one temperature, wrong vent output, or one side blowing hot while the other blows cold. It is one of the most common Fusion comfort complaints across all generations.
Replace the failed blend-door actuator (driver side of the HVAC housing, accessed by dropping the glove box). After replacement, perform the actuator calibration: reconnect the battery, turn ignition to On without starting, and let the system self-learn its range for at least a minute. Parts are inexpensive; labor rises sharply if a deeper actuator requires dash removal.
The exact parts — OEM, plus what owners actually use. Skip the internet hunt.
Verified OEM Motorcraft/Ford blend-door (temperature) actuator for 2006-2012 Ford Fusion, Mercury Milan and Lincoln MKZ (driver-side of HVAC housing, reached via dropped glove box). Ford OEM ~$52 (MSRP ~$85); Dorman 604-229 aftermarket ~$37. This is the classic 'clicking behind dash / stuck temperat
Verified OEM Ford temperature blend-door actuator for 2013-2020 Ford Fusion and Lincoln MKZ (also Edge/Continental). GS7Z-19E616-B is the current supersession of DG9Z-19E616-A / DG9H-19E616 castings. Ford OEM ~$33-52; Dorman 604-294 aftermarket ~$15-30. Same failure mode (stripped plastic gears, cli
Part links may earn au7o a commission. Confirm fitment by VIN before buying.
ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY:MANAGEMENT SYSTEM/ENERGY CONTROL MODULE (BMS/BECM)
Ford Motor Company (Ford) is recalling certain 2019-2020 Fusion PHEV vehicles. The battery energy control module (BECM) may become damaged due to excessive voltage and current flow.
BACK OVER PREVENTION:SOFTWARE
Ford Motor Company (Ford) is recalling certain 2018-2022 Transit Connect, 2019-2020 MKZ, MKX, Edge, Continental, F-150, Nautilus, Fusion, 2019-2023 Ranger, Mustang, 2020-2021 EcoSport, Expedition, Navigator, 2020-2022 Escape, F-250 SD, Corsair, 2020-2023 Aviator, Transit, 2020-2024 Explorer, 2021-2024 Bronco Sport, and 2022-2024 Maverick vehicles. A software error may cause the rearview camera to display a blank image, or the image may remain on the display after the backing event has ended.
EQUIPMENT:ELECTRICAL:ENGINE BLOCK HEATER
Ford Motor Company (Ford) is recalling certain 2016-2019 Lincoln MKC, 2016-2023 Explorer, 2019-2020 Fusion, 2019-2024 Ranger, 2020-2022 Lincoln Corsair, Escape, 2021-2024 Bronco, Bronco Sport, and 2022-2024 Maverick vehicles. The engine block heater may crack and develop a coolant leak, causing it to short circuit when the block heater is plugged in.
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
Ford Motor Company (Ford) is recalling certain 2013-2018 Fusion and Lincoln MKZ vehicles. The front brake hoses may rupture and leak brake fluid.
STEERING: STEERING WHEEL/HANDLE BAR
Ford Motor Company (Ford) is recalling certain 2014-2018 Lincoln MKZ and Ford Fusion vehicles. The steering wheel retaining bolt may loosen allowing the steering wheel to detach while driving.
+ 13 more recalls. Check all on NHTSA.gov
Enter your VIN at NHTSA.gov to check recalls specific to your vehicle.
Don't see your problem? Describe your symptoms to get a diagnosis, or get a full repair guide.
According to Au7o's research across NHTSA recalls, manufacturer TSBs, and owner forum reports, the 2007-2007 Ford Fusion has 1 documented issues. The most frequently reported are: HVAC Blend Door Actuator Failure - Clicking/Knocking Behind Dash, No Heat or AC. None are rated critical, but regular maintenance is recommended.
The 2007-2007 Ford Fusion has 1 known issues compiled from NHTSA recalls, manufacturer TSBs, and owner forum reports. No issues are rated critical, suggesting generally good reliability. Regular maintenance following the manufacturer's schedule helps prevent many common problems.
Repair costs for known Ford Fusion issues range from $156 to $400, depending on the specific problem and whether you choose DIY or professional repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.
The plastic gears inside the HVAC blend-door actuator strip out, so the door can no longer move to route air correctly. The classic symptom is a repeated clicking or knocking noise from behind the dash (often at startup or when changing temperature), along with air stuck on one t… Repairs typically run $156-$400. Severity: medium.
Content on this page was compiled with AI assistance using NHTSA complaints, TSBs, owner reports, and public automotive data. While we strive for accuracy, this information may contain errors. Always verify repair procedures and specifications with your vehicle's service manual or a qualified mechanic.
