2000 model year · NHTSA recalls, manufacturer TSBs, and owner forum reports · Updated August 2026
According to Au7o's research across NHTSA recalls, manufacturer TSBs, and owner forum reports, the 2000 Nissan Quest has 1 documented issue, with 1 rated critical. The most serious is Rack and Pinion Steering Gear Mounting Bolts Improperly Torqued (V41, Recall 00V292) ($0-$0 repair). DIY maintenance guides at au7o.io.
FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:MOUNTING
VEHICLE DESCRIPTION: MINI VANS. THE FUEL TANK RETENTION STRAP (TWO STRAPS PER VEHICLE) CAN BREAK AT THE SPOT WELDS CAUSING AN UNDERBODY RATTLE.
SEATS:MID/REAR ASSEMBLY
VEHICLE DESCRIPTION: MINI VANS EQUIPPED WITH E-Z ENTRY SEATS. THE AFFECTED VEHICLES MAY HAVE A SECOND ROW RIGHT HAND SIDE CAPTAIN CHAIR THAT HAS INADEQUATE LUBRICATION OF THE EASY ENTRY AND EXIT LATCH SYSTEM. IN SOME CASES, THE ACTUATOR SPRING IN THE LATCH COULD DEFORM AFTER REPEATED USE, CAUSING THE LATCH TO REMAIN IN THE UNLATCHED POSITION. IF THIS OCCURS, THE SEAT WILL SLIDE FREELY ON THE SEAT TRACK AND THE SPRINGS ON THE TRACK WILL MOVE THE SEAT TO THE EASY ENTRY POSITION TOWARD THE FRONT OF THE VEHICLE.
SEAT BELTS
VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH TRW SEAT BELT BUCKLE ASSEMBLIES. THE BUCKLE BASE OF THESE SEAT BELT ASSEMBLIES WERE NOT PROPERLY HEAT TREATED AND THEREFORE DO NOT PASS THE LOAD BEARING REQUIREMENT OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, "SEAT BELT ASSEMBLIES."
EXTERIOR LIGHTING:TAIL LIGHTS
VEHICLE DESCRIPTION: MINIVANS AND LIGHT DUTY TRUCKS. THE TAIL LIGHT SOCKET MAY HAVE BEEN IMPROPERLY MOLDED, RESULTING IN THE LOCKING TAB HAVING INSUFFICIENT FORCE TO RETAIN THE BULB.
STEERING:RACK AND PINION
VEHICLE DESCRIPTION: MINI VANS. ONE OR MORE OF THE FIVE BOLTS THAT MOUNT THE RACK AND PINION STEERING GEAR TO THE VEHICLE MAY HAVE BEEN INCORRECTLY TIGHTENED.
Enter your VIN at NHTSA.gov to check recalls specific to your vehicle.
Don't see your problem? Describe your symptoms to get a diagnosis, or get a full repair guide.
According to Au7o's research across NHTSA recalls, manufacturer TSBs, and owner forum reports, the 2000 Nissan Quest has 1 documented issue. The documented issue is: Rack and Pinion Steering Gear Mounting Bolts Improperly Torqued (V41, Recall 00V292). Of these, 1 is rated critical and should be addressed promptly.
The 2000 Nissan Quest has 1 known issue compiled from NHTSA recalls, manufacturer TSBs, and owner forum reports. 1 issue is rated critical: Rack and Pinion Steering Gear Mounting Bolts Improperly Torqued (V41, Recall 00V292). Prospective buyers should inspect for these issues and factor potential repair costs into their purchase decision. Regular maintenance following the manufacturer's schedule helps prevent many common problems.
Repair costs for known Nissan Quest issues range from $0 to $0, depending on the specific problem and whether you choose DIY or professional repair. The most critical issue, Rack and Pinion Steering Gear Mounting Bolts Improperly Torqued (V41, Recall 00V292), typically costs $0-$0 to repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.
NHTSA campaign 00V292002 covers second-generation Quest minivans in which one or more of the five bolts mounting the rack and pinion steering gear to the vehicle may have been tightened incorrectly at the factory. The first sign is looseness in the steering, often with a knock, c… Repairs typically run $0-$0. Severity: high.
Content on this page was compiled with AI assistance using NHTSA complaints, TSBs, owner reports, and public automotive data. While we strive for accuracy, this information may contain errors. Always verify repair procedures and specifications with your vehicle's service manual or a qualified mechanic.
