Toyota · Known Issues

2007 Toyota Avensis Problems: 1 Known Issue

2007 model year · NHTSA recalls, manufacturer TSBs, and owner forum reports · Updated October 2026

According to Au7o's research across NHTSA recalls, manufacturer TSBs, and owner forum reports, the 2007 Toyota Avensis has 1 documented issue, with 1 rated critical. The most serious is Mechanically Failed D-4D Injector Causes Poor Combustion in One Cylinder ($250-$2,600 repair). Across all issues with published estimates, repair costs range from $250 to $2,600. DIY maintenance guides at au7o.io.

2007 · All trims · All engines

Choose the year and equipment for your written issues and visual request.

YearTrimEngine

No email neededHow interest is saved

Interest applies to the selected vehicle and configuration; it is not a reservation. Voting stores a first-party identifier for up to 180 days to prevent repeat votes. No account or email is needed. Clearing cookies or using another device may count separately. Privacy

Visual coming soon

Your interest helps us choose what to build next.

Visual Known Issues · Coming soon

$4.99/month plus taxes at launch · No payment today

Preview the XT6 example

All 1 Known Issue

Filter:

On the 2005-2014 Toyota Avensis, on Toyota's D-4D common-rail diesels, P1238 is not a Ford-style fuel-pump code at all — Toyota defines it as Injector Malfunction. The ECM watches crankshaft rotation speed between firing events, and when the speed fluctuation attributable to one cylinder is consistently larger than the others, it concludes that cylinder is not producing its share of combustion and stores P1238. Toyota's trouble-area list for the code covers the injector, the injector driver/EDU, the engine wiring harness and connectors, compression pressure and valve clearance — but when P1238 is the only code stored and the injector circuit checks out electrically, the probable cause is a mechanical injector fault or insufficient compression rather than a wiring problem. That distinction matters, because it is what separates P1238 from the electrical injector-circuit codes in the P0200 family, which point squarely at the harness or the injector driver. The 2.0 and 2.2 D-4D engines (1AD-FTV, 2AD-FTV and the piezo-injector 2AD-FHV) are known for injectors that go mechanically lazy well before the rest of the engine is worn out. These injectors run at extremely high rail pressure with several injection events per stroke and very tight internal clearances, so nozzle needles stick, seats wear and the delivered volume drifts away from the ECM's commanded value. Poor fuel quality and long service intervals accelerate it. Each injector also carries a QR/compensation code that the ECM must know; an injector fitted without its correction data programmed in will behave exactly like a failing one and can itself provoke P1238. Drivers typically report a rough or lumpy idle, a diesel knock or rattle that is loudest when cold, hesitation and flat throttle response, visible smoke, worse fuel economy, and the check engine light appearing intermittently and then permanently; on DPF-equipped cars P1238 often shows up alongside P2002 with the car dropping into limp mode. On the Toyota Owners Club forums, owners with this code on the 2AD-FTV Avensis and the 1AD-FTV Auris describe rough idle, black smoke and hard starting; some cleared it with a fuel-system cleaner, while others needed one faulty injector replaced by a diesel specialist. Left alone, a leaking injector can wash the bore, dilute the oil with diesel and eventually damage the piston.

This issue also affects: Toyota Hilux, Toyota Land Cruiser

Common Symptoms

Rough or lumpy idle
Diesel knock or rattle worst when cold
Hesitation and flat throttle response
Black or white smoke from the exhaust
Increased fuel consumption
Check engine light on with no other codes stored

How to Fix

Work the code the way Toyota lays it out, and resist the urge to buy injectors first. Start by reading live data with a scan tool capable of Toyota's injector correction values — Techstream or an equivalent — and record per-cylinder fuel correction and idle contribution. A cylinder demanding a large positive or negative correction while the others sit near zero identifies the suspect. Be aware that Techstream's injector data is indicative, not conclusive: injectors that read acceptable have repeatedly turned out to need replacement, so back the reading up with a physical test. Check the injector harness, connectors and injector driver first, since a chafed harness or a damaged driver has produced this code on these cars and is far cheaper to fix than a set of injectors. Before condemning anything, rule out the mechanical alternatives the manual names. Run a compression test on the flagged cylinder and check valve clearances; low compression from worn rings or tight valves produces the identical code and no number of injectors will fix it. Also inspect for a leaking injector seat washer, since blow-by past a bad copper washer both hurts the seal and contaminates the oil. Then run a return-flow (spill) test with the leak-off lines removed: a cylinder returning far more fuel than its neighbours has an internally worn injector. If the suspect injector still looks marginal, have it bench-tested at a diesel injection shop, which is the only definitive answer. Repair is replacement of the failed injector — but on these engines it is usually recommended to do the full set, because mixing a new injector with three worn ones (or genuine Denso with aftermarket units of different atomisation characteristics) leaves the engine unbalanced and often re-sets the code on another cylinder. Always fit new copper seat washers and new high-pressure lines where required, torque to spec, and program each injector's compensation/QR code into the ECM. Skipping the coding step is one of the most common reasons P1238 comes straight back after a repair. Finish with an injector learn/idle-balance relearn, then clear the code and idle the engine for about ten minutes after warm-up before confirming the code has not returned. Budget roughly $250-$600 for a single injector replaced and coded, and $1,000-$2,600 for a full set of four with washers and labour; if compression is the real fault, the repair is engine work in a different price class entirely.

Typical repair cost:$250 - $2,600

Research This Issue

Google Reddit YouTube NHTSA

Community Reported

Medium ConfidenceVerifiedUpdated Oct 2026

🔧

A mechanic who knows YOUR exact car

Answers tuned to your year, make, model & trim — not generic advice. Save your garage so it always has the right context.

Get ahead of Toyota Avensis problems — free

Leave your email and we'll alert you the moment there's a new recall or known issue for your Toyota Avensis. Free, no account needed.

Join 600+ people using Au7o to better understand their vehicles.

Don't see your problem? Describe your symptoms to get a diagnosis, or get a full repair guide.

Other Toyota Models

Toyota RAV458 Toyota Camry54 Toyota Highlander50 Toyota Corolla49 Toyota 4Runner43 Toyota Tacoma39

Frequently Asked Questions

What are the most common Toyota Avensis problems?

According to Au7o's research across NHTSA recalls, manufacturer TSBs, and owner forum reports, the 2007 Toyota Avensis has 1 documented issue. The documented issue is: Mechanically Failed D-4D Injector Causes Poor Combustion in One Cylinder. Of these, 1 is rated critical and should be addressed promptly.

Is the Toyota Avensis reliable?

The 2007 Toyota Avensis has 1 known issue compiled from NHTSA recalls, manufacturer TSBs, and owner forum reports. 1 issue is rated critical: Mechanically Failed D-4D Injector Causes Poor Combustion in One Cylinder. Prospective buyers should inspect for these issues and factor potential repair costs into their purchase decision. Regular maintenance following the manufacturer's schedule helps prevent many common problems.

How much does it cost to fix common Toyota Avensis problems?

Repair costs for known Toyota Avensis issues range from $250 to $2,600, depending on the specific problem and whether you choose DIY or professional repair. The most critical issue, Mechanically Failed D-4D Injector Causes Poor Combustion in One Cylinder, typically costs $250-$2,600 to repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.

What is the 2005-2014 Toyota Avensis Mechanically Failed D-4D Injector Causes Poor Combustion in One Cylinder?

On Toyota's D-4D common-rail diesels, P1238 is not a Ford-style fuel-pump code at all — Toyota defines it as Injector Malfunction. The ECM watches crankshaft rotation speed between firing events, and when the speed fluctuation attributable to one cylinder is consistently larger t… Repairs typically run $250-$2,600. Severity: high.

Content on this page was compiled with AI assistance using NHTSA complaints, TSBs, owner reports, and public automotive data. While we strive for accuracy, this information may contain errors. Always verify repair procedures and specifications with your vehicle's service manual or a qualified mechanic.