What are the most common Chrysler Sebring problems?
According to Au7o's analysis of 2,200+ owner reports, the 2009 Chrysler Sebring has 9 documented issues. The most frequently reported are: 2.7L V6 Engine Oil Sludge and Premature Failure, Automatic Transmission Slipping and Shifting Problems, 2.7L V6 Timing Chain Stretch and Internal Water Pump Seizure. Of these, 5 are rated critical and should be addressed promptly.
Is the Chrysler Sebring reliable?
The 2009 Chrysler Sebring has 9 known issues documented across 2,200+ owner reports. 5 issues are rated critical: 2.7L V6 Engine Oil Sludge and Premature Failure and Automatic Transmission Slipping and Shifting Problems and 2.7L V6 Timing Chain Stretch and Internal Water Pump Seizure and 3.5L V6 Head Gasket Failure and Overheating and TIPM (Totally Integrated Power Module) Failure. Prospective buyers should inspect for these issues and factor potential repair costs into their purchase decision. Regular maintenance following the manufacturer's schedule helps prevent many common problems.
How much does it cost to fix common Chrysler Sebring problems?
Repair costs for known Chrysler Sebring issues range from $50 to $6,000, depending on the specific problem and whether you choose DIY or professional repair. The most critical issue, 2.7L V6 Engine Oil Sludge and Premature Failure, typically costs $1,500-$6,000 to repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.
What is the 2001-2010 Chrysler Sebring 2.7L V6 Engine Oil Sludge and Premature Failure?
The 2.7L V6 engine is highly susceptible to oil sludge buildup due to higher than average operating temperatures, insufficient oil capacity (5 quarts instead of 6), and a timing chain-driven water pump that can leak coolant into the crankcase. Engine failures have been reported a… Repairs typically run $1,500-$6,000. Severity: high.
What is the 2001-2010 Chrysler Sebring Automatic Transmission Slipping and Shifting Problems?
The A604 (41TE) transmission used in 2001-2006 models and the 62TE 6-speed transmission in 2007-2010 models are prone to slipping between gears, hard shifts, and delayed engagement. The A604 has known OE design flaws, while the 62TE commonly experiences solenoid pack failures. Repairs typically run $400-$4,500. Severity: high.
What is the 2001-2010 Chrysler Sebring 2.7L V6 Timing Chain Stretch and Internal Water Pump Seizure?
The 2.7L V6 uses a timing chain that stretches prematurely due to oil sludge buildup restricting lubrication. The chain-driven internal water pump can seize and cause the timing chain to jump, destroying the engine. Water pump, timing chain, guides, and tensioner are all internal… Repairs typically run $1,200-$2,500. Severity: high.
What is the 2001-2010 Chrysler Sebring 3.5L V6 Head Gasket Failure and Overheating?
The 3.5L V6 engine has common issues including leaky head gaskets, coolant leaks, and overheating. The water pump uses a molded plastic impeller that erodes from rust and sediment in the coolant, reducing cooling efficiency. These engines run hot and are prone to oil sludging, es… Repairs typically run $400-$2,500. Severity: high.
What is the 2007-2010 Chrysler Sebring TIPM (Totally Integrated Power Module) Failure?
The Totally Integrated Power Module (TIPM), located in the engine compartment near the air cleaner assembly, houses all important fuses and power relays. Water intrusion into the module can cause corrosion and electrical system failures. The TIPM controls critical systems includi… Repairs typically run $250-$1,400. Severity: high.
What is the 2001-2010 Chrysler Sebring Alternator and PCM-Integrated Voltage Regulator Failure?
The Sebring's voltage regulator is integrated into the PCM (Powertrain Control Module), not the alternator. This unusual design means a voltage regulator failure requires PCM diagnosis/replacement rather than simple alternator work. Alternators also fail prematurely around 70,000… Repairs typically run $200-$1,000. Severity: medium.
What is the 1996-2010 Chrysler Sebring Convertible Top Water Leaks and Drainage Issues?
Convertible models are prone to multiple water leak issues. The rear window can separate from the convertible top fabric as the top shrinks with age. The drain system below the convertible top can become clogged, causing water to back up into the rocker panels and interior. Weath… Repairs typically run $50-$4,000. Severity: medium.
What is the 1996-2010 Chrysler Sebring Front Suspension Control Arm and Bushing Wear?
The front suspension control arms and bushings are prone to premature wear, with over 45 reported problems specifically related to front suspension control arms. Ball joints rust and require replacement, and control arms can become loose over time. Worn control arm bushings cause… Repairs typically run $255-$1,200. Severity: medium.
What is the 1996-2010 Chrysler Sebring Power Window Regulator and Motor Failure?
Power window regulators and motors are a common failure point across all Sebring body styles. The cable-style regulators are prone to plastic component breakage, causing the metal cable to become loose and the window to fall into the door. Cable grooves wear over time, causing fr… Repairs typically run $227-$400. Severity: low.
