What are the most common Toyota 86 problems?

According to Au7o's analysis of 0+ owner reports, the 2013-2013 Toyota 86 has 2 documented issues. The most frequently reported are: Valve Spring Recall (Early Production), Throwout Bearing Chirp and Premature Failure. None are rated critical, but regular maintenance is recommended.

Is the Toyota 86 reliable?

The 2013-2013 Toyota 86 has 2 known issues documented across 0+ owner reports. No issues are rated critical, suggesting generally good reliability. Regular maintenance following the manufacturer's schedule helps prevent many common problems.

How much does it cost to fix common Toyota 86 problems?

Repair costs for known Toyota 86 issues range from $0 to $1,500, depending on the specific problem and whether you choose DIY or professional repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.

What is the 2013-2014 Toyota 86 Valve Spring Recall (Early Production)?

Early 2013-2014 Toyota 86 models were subject to a valve spring recall similar to the later GR86 issue. Improperly manufactured valve springs could fracture, causing engine misfires and potential internal engine damage. The FA20 engine's boxer layout means a broken valve spring p… Repairs typically run $0-$0. Severity: critical.

2013 Toyota 86 Problems: 2 Issues Every Owner Should Know

2013 model year · 0+ owner reports · Updated April 2026

Share:@au7o.io

According to Au7o's analysis of 0+ owner reports, the 2013 Toyota 86 has 2 documented known issues. No issues are rated critical, indicating generally reliable ownership. Across all issues, repair costs range from $0 to $1,500. DIY maintenance guides at au7o.io.

All 2 Known Issues

Filter:

On the 2013-2020 Toyota 86 2.0L FA20 Flat-4, the Toyota 86 (and its twin, the Subaru BRZ) is widely known for throwout bearing chirp — a cricket-like sound when the clutch pedal is depressed. While some level of noise is considered "normal" by Toyota, excessive chirping progresses to grinding and eventual bearing failure requiring transmission removal. The issue affects both the original release bearing and some replacement bearings.

Common Symptoms

Chirping or squeaking when clutch pedal is pressed
Noise worsens in cold weather
Grinding sensation in clutch pedal
Noise disappears at full engagement or full release

How to Fix

Mild chirping is considered normal and not harmful. If the noise becomes a loud grinding or the clutch pedal develops a rough feel, the throwout bearing should be replaced. This requires transmission removal ($600-$1,200 labor). Replace the clutch disc and pressure plate at the same time if they have over 60,000 miles. Some owners install an aftermarket bearing from ACT or Exedy for improved longevity.

What Owners Are Using

Parts and tips from 0+ owners who fixed this issue

TipDon't rest your foot on the clutch pedal while driving. Even light pressure keeps the throwout bearing spinning against the pressure plate fingers and accelerates wear.
UpgradeMobil 1 75W-90 synthetic gear oil for differential and transfer case (Mobil 1 Synthetic Gear Oil 75W-90)
View on Amazon
UpgradeFel-Pro gasket kit for drivetrain service (Fel-Pro Gasket Kit)
View on Amazon

Typical repair cost:$600 - $1,500

Research This Issue

0+ owners have reported this issue

Google Reddit YouTube NHTSA

Community Reported

Medium Confidence0 reportsLast reported by owners Invalid DateReviewed Invalid Date