What are the most common Toyota Camry problems?
According to Au7o's research across NHTSA recalls, manufacturer TSBs, and owner forum reports, the 1999-1999 Toyota Camry has 4 documented issues. The most frequently reported are: Camshaft / Crankshaft Position Sensor Failure (P0335/P0340) Causing Stalling and Crank-No-Start, V6 Knock Sensor and In-Valley Wiring Harness Failure (P0325/P0330) Causing Power Loss and Check Engine Light, Hydraulic Power-Steering Rack and High-Pressure Hose Leak Causing Whine and Hard Steering. Of these, 1 is rated critical and should be addressed promptly.
Is the Toyota Camry reliable?
The 1999-1999 Toyota Camry has 4 known issues compiled from NHTSA recalls, manufacturer TSBs, and owner forum reports. 1 issue is rated critical: Camshaft / Crankshaft Position Sensor Failure (P0335/P0340) Causing Stalling and Crank-No-Start. Prospective buyers should inspect for these issues and factor potential repair costs into their purchase decision. Regular maintenance following the manufacturer's schedule helps prevent many common problems.
How much does it cost to fix common Toyota Camry problems?
Repair costs for known Toyota Camry issues range from $50 to $900, depending on the specific problem and whether you choose DIY or professional repair. The most critical issue, Camshaft / Crankshaft Position Sensor Failure (P0335/P0340) Causing Stalling and Crank-No-Start, typically costs $150-$500 to repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.
What is the 1998-2013 Toyota Camry Camshaft / Crankshaft Position Sensor Failure (P0335/P0340) Causing Stalling and Crank-No-Start?
The crankshaft position sensor (P0335) and camshaft position sensor (P0340/P0345) lose signal as they age or their tone-ring reluctor gets contaminated, causing intermittent stalling — a real safety hazard in traffic — and eventually a crank-but-no-start condition. On 2006-2012 2… Repairs typically run $150-$500. Severity: high.
What is the 1994-2006 Toyota Camry V6 Knock Sensor and In-Valley Wiring Harness Failure (P0325/P0330) Causing Power Loss and Check Engine Light?
On V6 Camrys the two knock sensors sit deep in the engine valley beneath the intake manifold, and their shielded signal-wire harness bakes in the heat between the cylinder banks. The harness insulation becomes brittle and the shielded wire shorts to ground, setting P0325 (Bank 1)… Repairs typically run $300-$800. Severity: medium.
What is the 1997-2006 Toyota Camry Hydraulic Power-Steering Rack and High-Pressure Hose Leak Causing Whine and Hard Steering?
On hydraulically-assisted (pre-electric) Camrys the steering rack's internal seals and the high-pressure feed hose deteriorate and leak power-steering fluid, most often at the rack ends and the pressure hose. As fluid drops the pump whines/groans when turning and steering effort… Repairs typically run $200-$900. Severity: medium.
What is the 1994-2010 Toyota Camry Front Upper 'Dogbone' Torque-Strut Engine Mount Failure Causing Clunk on Acceleration and Shifting?
The transverse Camry drivetrain is located by a small top passenger-side torque-strut mount owners call the 'dogbone.' Its rubber bushings tear with age, letting the engine rock. The classic symptom is a loud clunk when accelerating, when lifting off, and when shifting between Re… Repairs typically run $50-$250. Severity: low.
