According to Au7o's analysis of 1,460+ owner reports, the 2011 Subaru WRX STI has 15 documented known issues, with 5 rated critical. The most serious are EJ257 Piston Ringland Failure ($3,000-$7,000 repair), Power Steering Hose/Line Leak (ATF on Exhaust, Smoke/Burning Smell) ($250-$900 repair), Steering Rack Internal Leak/Failure (Heavy Steering, Fluid Loss) ($900-$2,200 repair), Hatchback Rear Strut Tower Cracking/Seam Separation (GR STI) ($800-$3,500 repair) and Oil Starvation During Hard Cornering (EJ257 Boxer Engine) ($200-$3,500 repair). The most commonly reported issue is EJ257 Piston Ringland Failure with 280 owner reports. Across all issues with published estimates, repair costs range from $50 to $7,000. DIY maintenance guides at au7o.io.
According to Au7o's analysis of 1,460+ owner reports, the 2011 Subaru WRX STI has 15 documented issues. The most frequently reported are: EJ257 Piston Ringland Failure, Power Steering Hose/Line Leak (ATF on Exhaust, Smoke/Burning Smell), Steering Rack Internal Leak/Failure (Heavy Steering, Fluid Loss). Of these, 5 are rated critical and should be addressed promptly.
Is the Subaru WRX STI reliable?
The 2011 Subaru WRX STI has 15 known issues documented across 1,460+ owner reports. 5 issues are rated critical: EJ257 Piston Ringland Failure and Power Steering Hose/Line Leak (ATF on Exhaust, Smoke/Burning Smell) and Steering Rack Internal Leak/Failure (Heavy Steering, Fluid Loss) and Hatchback Rear Strut Tower Cracking/Seam Separation (GR STI) and Oil Starvation During Hard Cornering (EJ257 Boxer Engine). Prospective buyers should inspect for these issues and factor potential repair costs into their purchase decision. Regular maintenance following the manufacturer's schedule helps prevent many common problems.
How much does it cost to fix common Subaru WRX STI problems?
Repair costs for known Subaru WRX STI issues range from $50 to $7,000, depending on the specific problem and whether you choose DIY or professional repair. The most critical issue, EJ257 Piston Ringland Failure, typically costs $3,000-$7,000 to repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.
What is the 2008-2021 Subaru WRX STI EJ257 Piston Ringland Failure?
The STI's EJ257 2.5L turbocharged boxer engine is prone to piston ringland cracking, particularly on cylinder 4. Pre-detonation (knock) from heat soak, lean conditions, or aggressive tuning cracks the thin ringland bridges between piston ring grooves. This causes compression loss… Repairs typically run $3,000-$7,000. Severity: high.
What is the 2008-2014 Subaru WRX STI Power Steering Hose/Line Leak (ATF on Exhaust, Smoke/Burning Smell)?
A known WRX STI issue is leakage from power steering pressure/return hoses and line crimps, which can drip fluid onto hot engine/exhaust components. Owners report a burning smell, smoke from the engine bay, and a dropping power steering fluid level with increased steering noise. Repairs typically run $250-$900. Severity: high.
Content on this page was compiled with AI assistance using NHTSA complaints, TSBs, owner reports, and public automotive data. While we strive for accuracy, this information may contain errors. Always verify repair procedures and specifications with your vehicle's service manual or a qualified mechanic.
Filter:
When Issues Typically Appear
Rear Differential Whine and Wear
15K-20K
Power Steering Hose/Line Leak (ATF on Exhaust, Smoke/Burning Smell)
Catalytic Converter Efficiency Failure (P0420) on Stock Downpipe
80K-180K
050K100K150K200K mi
Community reported
280 owners
On the 2008-2021 Subaru WRX STI EJ257, the STI's EJ257 2.5L turbocharged boxer engine is prone to piston ringland cracking, particularly on cylinder 4. Pre-detonation (knock) from heat soak, lean conditions, or aggressive tuning cracks the thin ringland bridges between piston ring grooves. This causes compression loss and can lead to catastrophic engine failure.
Common Symptoms
Sudden loss of power on one cylinder
Blue/white smoke on acceleration
Knocking or pinging under boost
Excessive oil consumption
Misfire on cylinder 4
Compression test shows low on one cylinder
How to Fix
Once a ringland cracks, the engine must be rebuilt with forged pistons. Preventative measures include an air-oil separator to reduce carbon buildup, a proper tune on any modifications, and avoiding high-boost pulls immediately after idle. Run 93 octane exclusively.
Owner tips & cautions
WarningNever do a hard pull immediately from idle — let the car build boost gradually. Heat soak at idle followed by full boost is a primary ringland failure trigger.
High Confidence280 owner reportsLast reported by owners Mar 2026Reviewed Mar 2026
On the 2004-2021 Subaru WRX STI EJ257, the EJ257 boxer engine uses a shallow oil pan design that is prone to oil starvation during sustained high-G cornering, particularly on track days or aggressive canyon driving. The flat-four layout means oil sloshes away from the pickup tube during lateral loading, starving rod and main bearings of lubrication. This is a leading cause of spun rod bearings and catastrophic engine failure on STIs used for motorsport or spirited driving.
Common Symptoms
Low oil pressure warning light during hard cornering
Rod knock or bearing noise after track sessions
Metal flakes in oil filter at oil change
Sudden loss of oil pressure under lateral G-forces
Engine failure after sustained aggressive driving
How to Fix
Install an aftermarket baffled oil pan or oil pan baffle kit ($200-$400) from vendors like Killer B Motorsport or Crawford Performance. An air-oil separator (AOS) also helps by returning oil vapor to the sump. For dedicated track cars, a dry sump conversion ($2,000-$3,500) eliminates the issue entirely. Always run a quality 5W-30 or 5W-40 oil and check level before every track session.
What you need to fix it
Only diagnosis- and fitment-reviewed repair parts are linked here.
Killer B PPBC Cast Oil Pan, Ultimate Pickup and Baffle Package
matched track-use sump-control package after the vehicle use and oil-pressure evidence justify the modification Fitment/availability: 2004-2021 STI EJ257; also cataloged for 2002-2014 WRX, confirm header clearance, oil capacity and dipst…
As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.
Owner tips & cautions
WarningIf you track your STI on the stock oil pan, you WILL eventually spin a bearing. This is not an if, it is a when. Budget for the baffle before your first track day.
On the 2004-2021 Subaru WRX STI EJ257, the WRX STI’s top-mount intercooler couplers (notably the Y-pipe and turbo outlet/intercooler connections) can split or loosen with age, heat, and oil vapor exposure. Owners experience underboost, hesitation, and a whooshing sound under load, often without an immediate check engine light because the leak is post-MAF. This is widely documented in owner reports and service discussions for EJ257 TMIC plumbing.
Common Symptoms
Loss of boost/slow spool
Hesitation or surging under acceleration
Whooshing/hissing sound under load
Lower-than-normal peak boost
Oil mist around intercooler couplers
How to Fix
Pressure test the charge system; replace torn couplers/Y-pipe and clamps (many owners upgrade to reinforced silicone Y-pipes and quality T-bolt clamps). Inspect the turbo outlet, bypass valve gasket, and intercooler end tanks for leaks during reassembly.
What you need to fix it
Only diagnosis- and fitment-reviewed repair parts are linked here.
reinforced replacement couplers only after a leak or material failure is localized to the stock-style TMIC plumbing Fitment/availability: 2004-2021 STI using the OEM STI or GrimmSpeed top-mount intercooler; trim-to-fit geometry and possi…
Medium Confidence180 owner reportsReviewed Apr 2026
Community reported
110 owners
On the 2004-2014 Subaru WRX STI EJ257, wRX STI models with EJ257 intake TGV assemblies can develop failures in the TGV position sensors or actuator mechanisms, leading to stuck-open/stuck-closed conditions. Owners report check engine lights, rough cold starts, and reduced drivability, especially in colder weather. This issue is frequently discussed in owner reports and appears in diagnostic guidance/TSBs for Subaru intake runner control/TGV-related DTCs.
Common Symptoms
Check Engine Light with TGV-related codes
Rough idle or stumbling on cold start
Reduced throttle response
Poor fuel economy
Intermittent hesitation at low RPM
How to Fix
Scan for TGV-related codes and verify actuator movement and sensor feedback; repair wiring/connectors as needed. Replace the affected TGV assembly or sensor/motor components and perform ECU relearn procedures per Subaru service manual; ensure no intake vacuum leaks after reassembly.
Medium Confidence110 owner reportsReviewed Apr 2026
On the 2004-2021 Subaru WRX STI, the VF-series turbochargers on the STI develop boost leaks at intercooler couplers and charge pipe connections, causing inconsistent boost and reduced power. The internal wastegate actuator also develops a characteristic rattle at idle due to worn pivot pins and flapper valve play. While the rattle is mostly cosmetic, boost leaks cause significant power loss and can trigger overboost or underboost codes.
Common Symptoms
Inconsistent or low boost pressure
Hissing sound under boost from engine bay
Metallic rattle at idle from turbo area
Loss of power under full throttle
Check engine light for boost-related codes
Turbo spooling but not making full boost
How to Fix
For boost leaks: inspect all intercooler couplers, charge pipes, and clamps. Replace cracked silicone couplers ($50-$150 for a set) and upgrade to T-bolt clamps. Perform a boost leak test with a pressure tester ($30-$50 DIY tool). For wastegate rattle: replace the wastegate actuator ($200-$400) or upgrade to an aftermarket external wastegate setup ($400-$800). Some owners simply live with the rattle if boost holds steady.
Owner tips & cautions
TipBuild a DIY boost leak tester from PVC fittings and a tire valve stem for $30. Test at 20 PSI — you will hear every leak. Most STIs have at least one.
On the 2004-2021 Subaru WRX STI EJ257, the Active Valve Control System (AVCS) solenoids on the EJ257 engine are prone to failure from oil contamination and carbon buildup. When they stick or fail, the ECU cannot properly adjust camshaft timing, causing rough idle, hesitation, and reduced power. The solenoids are oil-controlled and degrade faster with extended oil change intervals or contaminated oil.
Common Symptoms
Check engine light with AVCS-related codes
Rough or hunting idle
Hesitation on acceleration
Reduced power in mid-range RPMs
Occasional stalling at idle
How to Fix
Replace the failed AVCS solenoid(s) — there are two on the EJ257, one per bank ($80-$150 each for parts). Clean the oil passages feeding the solenoids during replacement. Use OEM Subaru solenoids for reliability. Prevent future failures by using quality synthetic oil and changing every 3,000-4,000 miles under hard driving conditions. Some owners clean solenoids with brake cleaner as a temporary fix.
What you need to fix it
Only diagnosis- and fitment-reviewed repair parts are linked here.
Genuine Subaru 10921AA020 Intake AVCS Oil Control Valve
early intake OCV only after that valve fails electrical/hydraulic response testing Fitment/availability: EJ257 model years 2004-2006 intake AVCS position; sold individually, confirm VIN and bank Fitment/availability: In stock and ready t…
Genuine Subaru 10921AA080 Intake AVCS Oil Control Valve
middle intake OCV branch only after that valve fails electrical/hydraulic response testing Fitment/availability: EJ257 model years 2006-2010 intake AVCS position; overlap years require VIN confirmation, sold individually Fitment/availabi…
Genuine Subaru 10921AA140 Intake AVCS Oil Control Valve
late intake OCV branch only after that valve fails electrical/hydraulic response testing Fitment/availability: EJ257 model years 2010-2021 intake AVCS position; overlap years require VIN confirmation, sold individually Fitment/availabili…
Genuine Subaru 10917AA060 Right Exhaust AVCS Oil Control Valve and Holder
right exhaust valve/holder assembly only after right exhaust response or contamination failure is proven Fitment/availability: EJ257 model years 2008-2021 right-hand exhaust AVCS position only; confirm VIN Fitment/availability: In stock …
Genuine Subaru 10917AA070 Left Exhaust AVCS Oil Control Valve and Holder
left exhaust valve/holder assembly only after left exhaust response or contamination failure is proven Fitment/availability: EJ257 model years 2008-2021 left-hand exhaust AVCS position only; confirm VIN Fitment/availability: In stock and…
As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.
Owner tips & cautions
TipClean your AVCS solenoids every 30,000 miles as preventive maintenance. Remove them, spray with brake cleaner, and reinstall. Takes 20 minutes per side.
TipShort oil change intervals (3,000-4,000 miles) with quality synthetic oil are the best prevention. The EJ257 is hard on oil and dirty oil kills AVCS solenoids.
On the 2008-2014 Subaru WRX STI, a known WRX STI issue is leakage from power steering pressure/return hoses and line crimps, which can drip fluid onto hot engine/exhaust components. Owners report a burning smell, smoke from the engine bay, and a dropping power steering fluid level with increased steering noise. NHTSA complaints and owner reports frequently describe this as a recurring leak point on GR/GV-era cars.
Common Symptoms
Burning smell from engine bay after driving
Smoke from under hood near turbo/exhaust area
Power steering fluid level dropping
Whining noise when turning at low speed
Wet/oily residue on hoses or heat shields
How to Fix
Inspect for leaks at hose crimps, banjo fittings, and rack connections; replace leaking power steering pressure hose/return hose assemblies and sealing washers, then flush/refill with the specified fluid. Clean residual fluid from exhaust/heat shields to prevent continued smoke/odor and recheck for seepage after heat cycling.
What you need to fix it
Only diagnosis- and fitment-reviewed repair parts are linked here.
Genuine Subaru 34610FG001 Power Steering Pressure Hose Assembly
complete pressure hose only when leakage is localized to its tube, crimp or fitting Fitment/availability: 2008-2014 Impreza STI 2.5-liter turbo pressure-hose branch; replaces 34610FG000, confirm VIN Fitment/availability: Ships in 1 busin…
Medium Confidence90 owner reportsReviewed Apr 2026
On the 2008-2014 Subaru WRX STI, some WRX STI owners report steering rack seal wear leading to internal/external leakage and degraded assist, sometimes after repeated track use or high heat exposure. Symptoms include inconsistent assist, heavier steering effort, and fluid loss with wetness around the rack boots. This pattern appears in owner reports and NHTSA complaint narratives describing loss of assist and rack replacement.
Common Symptoms
Heavier steering effort, especially at low speed
Power steering fluid loss with no obvious hose leak
Wet rack boots or fluid dripping from rack area
Steering assist intermittent after hard driving
Clunk/knock felt through steering over bumps
How to Fix
Confirm leak at rack boots/lines and check for contamination; replace the steering rack assembly (or rebuild with new seals where available) and perform an alignment. Replace any leaking rack lines/banjo washers and flush the system to remove debris.
Medium Confidence45 owner reportsReviewed Apr 2026
On the 2008-2014 Subaru WRX STI, on 2008–2014 WRX STI hatchbacks (GR), owner reports and Subaru service communications document cracking around the rear strut tower area/seams that can produce rear-end clunks and alignment changes. The issue is associated with body seam fatigue in the rear suspension mounting area, sometimes exacerbated by rough roads or stiff suspension setups. This has been discussed extensively in owner forums and appears in Subaru technical guidance for inspection/repair of rear strut tower areas on GR chassis.
Common Symptoms
Clunking from rear over bumps
Visible cracking near rear strut tower seams (under trim)
Rear alignment drifting or uneven tire wear
Creaking noises from rear body structure
Rear suspension feels loose or unstable
How to Fix
Inspect rear strut towers and surrounding seams for cracks; repair typically involves welding/reinforcement of the affected area and repainting/sealing, and may include installing reinforcement plates. After structural repair, perform a four-wheel alignment and inspect rear suspension bushings/top hats for secondary damage.
Medium Confidence35 owner reportsReviewed Apr 2026
Community reported
220 owners
On the 2008-2014 Subaru WRX STI EJ257, subaru WRX STI models equipped with the EJ257 and secondary air injection commonly develop failures of the air pump and/or the air switching valves, often due to moisture intrusion and internal corrosion that causes the valves to stick. Owners typically see a check engine light with cold-start drivability changes and may fail emissions/inspection due to stored air injection codes. This issue is widely documented in owner reports and Subaru service information/TSBs covering secondary air injection diagnostics and component replacement.
Common Symptoms
Check Engine Light on after cold start
DTCs P0410, P2440/P2441/P2442/P2443 stored
Rough or high idle on cold start
Failed emissions/inspection readiness
Whining or abnormal noise from air pump area
How to Fix
Diagnose with scan tool and active tests; replace failed air pump and/or air switching valves and related hoses/gaskets. Common components include the secondary air pump and air switching valves (bank-specific); replace any water-damaged connectors and ensure updated routing/sealing per Subaru service guidance (refer to Subaru TSBs addressing secondary air injection DTCs for applicable years).
What you need to diagnose it
The repair instructions explicitly call for reading stored codes. Use a scanner that can read the named code families before choosing a repair.The recommended scanner supports these code families; confirm your exact year, model and module coverage before buying.
As an Amazon Associate, we earn from qualifying purchases. Prices are approximate and may vary.
Reading and clearing the code is DIY work. Module replacement or reprogramming is not — most modules are VIN-programmed, so a new one does nothing until a shop codes it to your car. Check for an open recall or service bulletin before buying anything.
Medium Confidence220 owner reportsReviewed Apr 2026
Community reported
140 owners
On the 2004-2021 Subaru WRX STI, owners of WRX STI models report P0420 catalyst efficiency codes as the front catalytic converter ages, especially on higher-mileage cars or those exposed to rich operation/misfires that damage the substrate. Symptoms are typically a check engine light and failed emissions readiness rather than immediate drivability problems. NHTSA complaints and owner reports commonly cite repeated P0420 returns even after sensor replacement when the catalyst is degraded.
Common Symptoms
Check Engine Light with P0420
Failed emissions/inspection
Sulfur/rotten-egg exhaust smell (sometimes)
Rattling from catalyst substrate (sometimes)
No significant drivability change
How to Fix
Confirm no exhaust leaks and verify A/F and O2 sensor operation; if sensors are functioning and no leaks are present, replace the catalytic converter/downpipe assembly that contains the catalyst. Use OEM-equivalent parts and replace gaskets/hardware; clear codes and complete drive cycle to confirm readiness.
Medium Confidence140 owner reportsReviewed Apr 2026
Community reported
160 owners
On the 2004-2021 Subaru WRX STI, wRX STI owners report premature wheel bearing wear, often presenting as a humming or growling noise that changes with speed and load, and sometimes accompanied by looseness at the hub. Aggressive driving, wider/stickier tires, and track use can accelerate bearing wear on these cars. This is a common owner-reported repair item and appears in NHTSA complaint narratives for Subaru performance models including STI.
Common Symptoms
Humming/growling noise that increases with speed
Noise changes when turning left/right
Vibration felt through chassis at highway speeds
Play or roughness when spinning wheel by hand
ABS/VDC light (occasionally if sensor tone ring affected)
How to Fix
Diagnose by road test and checking for play/roughness; replace the affected hub/bearing assembly and torque axle nut to specification. Inspect axle splines and knuckle condition; perform alignment check if suspension components were disturbed.
What you need to fix it
Only diagnosis- and fitment-reviewed repair parts are linked here.
Genuine Subaru 28316FE000 Front Axle Bearing
early front bearing only after that corner is localized and the press-in service plan is complete Fitment/availability: 2004-2007 Impreza STI front press-in bearing; current catalog supersession may be 28316FE0008A, confirm VIN and requi…
Genuine Subaru Rear Wheel Bearing and Seal Kit for 2004-2007 STI
early rear bearing-and-seal kit only after that corner is localized Fitment/availability: 2004-2007 STI rear press-in bearing, one axle/corner kit; includes Subaru bearing 28016PA010 and position seals 28015AA070/28015AA080 Fitment/avail…
Genuine Subaru 28373VC002 Front Wheel Hub and Bearing Assembly
later front hub/bearing only after that corner is localized Fitment/availability: 2008-2021 STI front bolt-on hub/bearing branch per the live product fitment; updated part supersedes earlier front hub numbers, confirm VIN Fitment/availab…
Genuine Subaru 28473VA012 Rear Wheel Hub and Bearing Assembly
later rear hub/bearing only after that corner is localized Fitment/availability: 2008-2021 STI rear bolt-on hub/bearing, 5x114.3, sold individually; confirm VIN Fitment/availability: Add to Cart live when reviewed
Medium Confidence160 owner reportsReviewed Apr 2026
On the 2004-2021 Subaru WRX STI, the STI rear differential (R180 in earlier models, R190 in later) develops a whining noise under load, particularly during deceleration and at highway speeds. Hard launches, aggressive driving, and track use accelerate ring and pinion gear wear. The limited-slip differential clutch packs also wear out, reducing rear-end grip and causing the diff to chatter in tight turns.
Common Symptoms
Whining or humming noise from rear at highway speeds
Noise that changes pitch with speed
Chattering or clunking in tight low-speed turns
Reduced rear traction during spirited driving
Metallic particles in differential fluid
How to Fix
Change rear differential fluid every 15,000-20,000 miles with 75W-90 GL-5 gear oil (Motul Gear 300 is a popular choice). For worn LSD clutch packs, a rebuild kit runs $300-$500 plus labor. If the ring and pinion are worn, a complete differential rebuild costs $1,200-$2,500. Upgraded aftermarket differentials from Cusco or Kaaz ($1,500-$3,000) are popular for track-focused STIs.
Owner tips & cautions
TipFrequent diff fluid changes are cheap insurance. Every 15,000 miles for street, every 5 track days for track use. Use Motul Gear 300 75W-90 — the STI community swears by it.
WarningDo NOT ignore rear diff whine. Continued driving on worn gears leads to sudden failure, which can lock the rear wheels at speed. Extremely dangerous.
On the 2008-2021 Subaru WRX STI, the STI's clutch throwout bearing wears prematurely, especially with aggressive driving. The bearing develops a chirping or squealing noise when the clutch pedal is depressed. The clutch fork pivot ball also wears its socket, causing clutch engagement point changes and incomplete disengagement.
Common Symptoms
Chirping or squealing when pressing clutch
Clutch engagement point changes
Difficulty getting into gear
Grinding when shifting
Clutch pedal vibration
Rattling at idle that stops when clutch is pressed
How to Fix
Replace the throwout bearing, clutch fork, and pivot ball together. Most owners replace the clutch disc and pressure plate at the same time since the transmission must come out. Upgrade to an aftermarket bearing with better heat tolerance if tracking the car.
What you need to fix it
Only diagnosis- and fitment-reviewed repair parts are linked here.
complete stock-style clutch service kit only when teardown shows clutch and release-system replacement is justified Fitment/availability: 2004-2021 Subaru STI 6-speed manual, direct-replacement pull-type clutch; includes throwout bearing…
High Confidence200 owner reportsLast reported by owners Mar 2026Reviewed Mar 2026
On the 2004-2021 Subaru WRX STI, despite the STI coming equipped with Brembo 4-piston front calipers, the factory brake pads and rotors fade significantly during track use or repeated hard stops from highway speeds. The OEM pads are street-compound and overheat quickly, causing a spongy pedal, longer stopping distances, and glazed rotors. Brake fluid also boils from heat soak, compounding the fade issue.
Common Symptoms
Spongy or soft brake pedal after repeated hard stops
Significantly longer stopping distances when brakes are hot
Burning smell from brakes after spirited driving
Brake pedal going to the floor when hot
Glazed or blue-tinted brake rotors
Vibration or judder when braking from high speed
How to Fix
Upgrade to track-capable brake pads such as Hawk DTC-60 (track) or DTC-30 (street/track) for $150-$250. Flush brake fluid with DOT 4 racing fluid (Motul RBF 600 or ATE Typ 200) every 12 months or before track events ($50-$80). Install stainless steel brake lines ($100-$150) for a firmer pedal. For heavy track use, upgrade rotors to DBA or StopTech two-piece units ($400-$800 per axle).
Owner tips & cautions
TipCool-down laps are critical. Never park immediately after hard braking — drive gently for 2-3 laps to prevent rotor warping and fluid boil. Also never use the parking brake while rotors are hot.
What is the 2008-2014 Subaru WRX STI Steering Rack Internal Leak/Failure (Heavy Steering, Fluid Loss)?
Some WRX STI owners report steering rack seal wear leading to internal/external leakage and degraded assist, sometimes after repeated track use or high heat exposure. Symptoms include inconsistent assist, heavier steering effort, and fluid loss with wetness around the rack boots. Repairs typically run $900-$2,200. Severity: high.
What is the 2008-2014 Subaru WRX STI Hatchback Rear Strut Tower Cracking/Seam Separation (GR STI)?
On 2008–2014 WRX STI hatchbacks (GR), owner reports and Subaru service communications document cracking around the rear strut tower area/seams that can produce rear-end clunks and alignment changes. The issue is associated with body seam fatigue in the rear suspension mounting ar… Repairs typically run $800-$3,500. Severity: high.
What is the 2004-2021 Subaru WRX STI Oil Starvation During Hard Cornering (EJ257 Boxer Engine)?
The EJ257 boxer engine uses a shallow oil pan design that is prone to oil starvation during sustained high-G cornering, particularly on track days or aggressive canyon driving. The flat-four layout means oil sloshes away from the pickup tube during lateral loading, starving rod a… Repairs typically run $200-$3,500. Severity: high.
What is the 2008-2014 Subaru WRX STI Air Injection System (Secondary Air Pump/Valves) Failure (P0410/P244x)?
Subaru WRX STI models equipped with the EJ257 and secondary air injection commonly develop failures of the air pump and/or the air switching valves, often due to moisture intrusion and internal corrosion that causes the valves to stick. Owners typically see a check engine light w… Repairs typically run $600-$2,200. Severity: medium.
What is the 2008-2021 Subaru WRX STI Clutch Throwout Bearing and Pivot Ball Wear?
The STI's clutch throwout bearing wears prematurely, especially with aggressive driving. The bearing develops a chirping or squealing noise when the clutch pedal is depressed. The clutch fork pivot ball also wears its socket, causing clutch engagement point changes and incomplete… Repairs typically run $800-$2,000. Severity: medium.
What is the 2004-2021 Subaru WRX STI Intercooler Y-Pipe/Turbo Inlet Coupler Tearing (Post-MAF Air Leak, Underboost)?
The WRX STI’s top-mount intercooler couplers (notably the Y-pipe and turbo outlet/intercooler connections) can split or loosen with age, heat, and oil vapor exposure. Owners experience underboost, hesitation, and a whooshing sound under load, often without an immediate check engi… Repairs typically run $120-$650. Severity: medium.
What is the 2004-2021 Subaru WRX STI Wheel Bearing Premature Wear (Humming/Growling, Play at Hub)?
WRX STI owners report premature wheel bearing wear, often presenting as a humming or growling noise that changes with speed and load, and sometimes accompanied by looseness at the hub. Aggressive driving, wider/stickier tires, and track use can accelerate bearing wear on these ca… Repairs typically run $350-$950. Severity: medium.
What is the 2004-2021 Subaru WRX STI Catalytic Converter Efficiency Failure (P0420) on Stock Downpipe?
Owners of WRX STI models report P0420 catalyst efficiency codes as the front catalytic converter ages, especially on higher-mileage cars or those exposed to rich operation/misfires that damage the substrate. Symptoms are typically a check engine light and failed emissions readine… Repairs typically run $900-$2,600. Severity: medium.
What is the 2004-2014 Subaru WRX STI Tumble Generator Valve (TGV) Sensor/Motor Fault (P2004/P2005/P2011/P2016)?
WRX STI models with EJ257 intake TGV assemblies can develop failures in the TGV position sensors or actuator mechanisms, leading to stuck-open/stuck-closed conditions. Owners report check engine lights, rough cold starts, and reduced drivability, especially in colder weather. Thi… Repairs typically run $250-$1,400. Severity: medium.
What is the 2004-2021 Subaru WRX STI Turbo Boost Leak and Wastegate Rattle?
The VF-series turbochargers on the STI develop boost leaks at intercooler couplers and charge pipe connections, causing inconsistent boost and reduced power. The internal wastegate actuator also develops a characteristic rattle at idle due to worn pivot pins and flapper valve pla… Repairs typically run $50-$800. Severity: medium.
What is the 2004-2021 Subaru WRX STI Rear Differential Whine and Wear?
The STI rear differential (R180 in earlier models, R190 in later) develops a whining noise under load, particularly during deceleration and at highway speeds. Hard launches, aggressive driving, and track use accelerate ring and pinion gear wear. The limited-slip differential clut… Repairs typically run $100-$3,000. Severity: medium.
What is the 2004-2021 Subaru WRX STI Brake Fade with Repeated Hard Stops (Brembo Calipers)?
Despite the STI coming equipped with Brembo 4-piston front calipers, the factory brake pads and rotors fade significantly during track use or repeated hard stops from highway speeds. The OEM pads are street-compound and overheat quickly, causing a spongy pedal, longer stopping di… Repairs typically run $150-$1,200. Severity: medium.
What is the 2004-2021 Subaru WRX STI AVCS Solenoid Failure (Variable Valve Timing)?
The Active Valve Control System (AVCS) solenoids on the EJ257 engine are prone to failure from oil contamination and carbon buildup. When they stick or fail, the ECU cannot properly adjust camshaft timing, causing rough idle, hesitation, and reduced power. The solenoids are oil-c… Repairs typically run $150-$500. Severity: medium.
